{"title":"METROPOLIS | Wireless Fire System","description":"\u003cp\u003eMS Electronics — SECURITY › FIRE ALARM › Wireless Fire System\u003c\/p\u003e","products":[{"product_id":"ms-electronics-27777","title":"Ajax EN54 Fire Detection Heat White","description":"\u003cul\u003e\n\t\u003cli\u003eEN54 FireProtect Jeweller detectors combine certified reliability with effortless installation. This wireless series includes addressable point smoke and heat detectors, some of them combined with built-in fire alarm sounders. Each detector provides best-in-class detection accuracy thanks to Ajax's patented smoke chamber with a dual-spectrum optical sensor and two accurate thermistors. With built-in communicators, long battery life, and stable radio communication, the devices are ready for different-scale projects. No need to open the enclosure or run cables — installation and configuration take just minutes via Ajax apps. Early service notifications and automated maintenance reports via Ajax PRO Desktop ensure the system stays easy to support for years.\u003c\/li\u003e\n\t\u003cli\u003eTwo built-in thermistors detect a rapid temperature rise or threshold exceedance. They trigger an alarm when a rapid temperature increase or static temperature is detected. Heat detector modes — A1, A1R, A1S, B, BR, BS, C, CR, CS, or a fixed temperature2 — can be selected in an Ajax app.\u003c\/li\u003e\n\t\u003cli\u003eThis approach ensures fast and accurate detection of flaming fires or heat build-up caused by smoldering, which is critical for timely response.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCommunication\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e Jeweller communication technology\u003c\/li\u003e\n\t\u003cli\u003eProprietary wireless communication technology to transmit commands, alarms, and events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo-way communication.\u003c\/li\u003e\n\t\u003cli\u003eAdvanced sabotage protection.\u003c\/li\u003e\n\t\u003cli\u003eBlock encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eInstant notifications.\u003c\/li\u003e\n\t\u003cli\u003eRemote control and configuration in Ajax apps.\u003c\/li\u003e\n\t\u003cli\u003eFrequency bands : 866.0–866.5 MHz \/ 868.0–868.6 MHz \/ 868.7–869.2 MHz \/ 905.0–926.5 MHz \/ 915.85–926.5 MHz \/ 921.0–922.0 MHz\u003c\/li\u003e\n\t\u003cli\u003eMaximum effective radiated power (ERP) : up to 20 mW \/ Automatic power control to reduce power consumption and radio interference.\u003c\/li\u003e\n\t\u003cli\u003eRadio signal modulation : GFSK\u003c\/li\u003e\n\t\u003cli\u003eRadio communication range : up to 1,700 m \/ Between the device and control and indicating equipment (CIE) or a range extender in an open space.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data is protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eDangerous temperature detection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSensitive element : 2 × thermistor \/ According to the EN 54-5 requirements for heat detectors of Class A1, B, and C with rate-of-rise (R) and static (S) response types.\u003c\/li\u003e\n\t\u003cli\u003eHeat sensor modes : A1, A1R, A1S \/ B, BR, BS \/ C, CR, CS \/ Fixed temperature \/ For better detection of fire hazards, depending on the installation site of the device. Can be selected in the device settings. Only the following heat sensor modes are compliant with EN 54 requirements: A1R, A1S, BR, BS, CR, and CS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlarm annunciation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAlarm type : acoustic\u003c\/li\u003e\n\t\u003cli\u003eSound volume : up to 95 dB at a distance of 1 m \/ Adjusted by a PRO or user with admin rights in an Ajax app.\u003c\/li\u003e\n\t\u003cli\u003eSound pattern : 32 tones\u003c\/li\u003e\n\t\u003cli\u003eSound synchronization : An audible alarm is automatically synchronized on all devices with a sounder connected to the same CIE.\u003c\/li\u003e\n\t\u003cli\u003eAlarm annunciation test : An audible alarm check to ensure the fire alarm is clearly audible on the premises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation recommendations : The device is designed for indoor use only.\u003c\/strong\u003e \/ \u003cstrong\u003eThe SmartBracket mounting panel allows the detector to be rotated up to 90° even after installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSabotage protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper button \/ Fault notification when an attempt is made to remove the device from the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003eLock for SmartBracket : to secure the device on the SmartBracket mounting panel \/ When locked, the lock secures the device and prevents it from being removed without a special tool.\u003c\/li\u003e\n\t\u003cli\u003eProtection against spoofing : device authentication\u003c\/li\u003e\n\t\u003cli\u003eConnection loss detection : after 36 s \/ Detection time depends on Jeweller settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery : 2 × CR123A \/ Pre-installed.\u003c\/li\u003e\n\t\u003cli\u003eTool-free battery replacement : To replace the batteries, open the lids of the battery compartments.\u003c\/li\u003e\n\t\u003cli\u003eReverse polarity protection : Prevents device damage if the batteries are put in incorrectly.\u003c\/li\u003e\n\t\u003cli\u003eRecommended battery type : Huiderui CR123A; 3 V; 1,600 mAh, LiMnO₂\u003c\/li\u003e\n\t\u003cli\u003eCalculated battery life : up to 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 124 × 124 × 48 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 278 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from 0 °C to +50 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 80%\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP21C\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\t\u003cli\u003eColor : White\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eComplete set\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEN54 FireProtect (Heat\/Sounder) Jeweller\u003c\/li\u003e\n\t\u003cli\u003eSmartBracket mounting panel\u003c\/li\u003e\n\t\u003cli\u003e2 × CR123A battery (pre-installed)\u003c\/li\u003e\n\t\u003cli\u003eInstallation kit\u003c\/li\u003e\n\t\u003cli\u003eQuick start guide\u003c\/li\u003e\n\t\u003cli\u003eRevision : 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\u003c\/ul\u003e","brand":"Ajax","offers":[{"title":"Default Title","offer_id":59996577038720,"sku":"30495","price":159.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/119921-3__1.jpg?v=1790675864"},{"product_id":"ms-electronics-26773","title":"Ajax EN54 Fire Detection Siren\/Strobe (Sounder\/VAD) White","description":"\u003cul\u003e\n\t\u003cli\u003eEN54 FireProtect (Sounder\/VAD) Jeweller is a wireless addressable fire alarm sounder combined with a visual alarm device (VAD). The device complies with EN 54 requirements and ensures alarm recognition in various environments, including noisy areas. Visual indication makes the alarm perceptible to people with hearing impairments.\u003c\/li\u003e\n\t\u003cli\u003eEN54 FireProtect (Sounder\/VAD) Jeweller operates as part of an Ajax system and communicates with control and indicating equipment (CIE) via secure Jeweller radio protocol. The communication range with the CIE is up to 1,700 m in an open space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCommunication\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e Jeweller communication technology : Proprietary wireless communication technology to transmit commands, alarms, and events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo-way communication.\u003c\/li\u003e\n\t\u003cli\u003eAdvanced sabotage protection.\u003c\/li\u003e\n\t\u003cli\u003eBlock encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eInstant notifications.\u003c\/li\u003e\n\t\u003cli\u003eRemote control and configuration in Ajax apps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFrequency bands : 866.0 – 866.5 MHz \/ 868.0 – 868.6 MHz \/ 868.7 – 869.2 MHz\u003cbr\u003e\n905.0 – 926.5 MHz \/ 915.85 – 926.5 MHz \/ 921.0 – 922.0 MHz\u003c\/p\u003e\n\n\u003cp\u003eDepends on the sales region.\u003c\/p\u003e\n\n\u003cp\u003eMaximum effective radiated power (ERP) : up to 20 mW \/ Automatic power control to reduce power consumption and radio interference.\u003c\/p\u003e\n\n\u003cp\u003eRadio signal modulation : GFSK\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eRadio communication range : up to 1,700 m \/ Between the device and control and indicating equipment (CIE) or a range extender in an open space.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data is protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlarm annunciation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAlarm type : acoustic and light \/ A sounder and LED frame.\u003c\/li\u003e\n\t\u003cli\u003eSound volume : up to 100 dB at a distance of 1 m \/ Adjusted by a PRO or user with admin rights in an Ajax app.\u003c\/li\u003e\n\t\u003cli\u003eSound pattern : 32 tones\u003c\/li\u003e\n\t\u003cli\u003eSound synchronization : An audible alarm is automatically synchronized on all devices with a sounder connected to the same CIE.\u003c\/li\u003e\n\t\u003cli\u003eFlash frequency : 90 ms ON \/ 1,910 ms OFF (cycle duration: 2,000 ms; frequency: 0.5 Hz)\u003c\/li\u003e\n\t\u003cli\u003eAlarm annunciation test : To check the sound and visual alarm signals to ensure fire alarm signals are clearly audible and visible in the premises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation recommendations : The device's recommended installation height is up to 3 m on the ceiling and up to 2.4 m on the wall. \/ The device is designed for outdoor and indoor use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSabotage protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper button : Fault notification when an attempt is made to remove the device from the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003eLock for SmartBracket : to secure the device on the SmartBracket mounting panel \/ When locked, the lock secures the device and prevents it from being removed without a special tool.\u003c\/li\u003e\n\t\u003cli\u003eProtection against spoofing : device authentication\u003c\/li\u003e\n\t\u003cli\u003eConnection loss detection : after 36 s \/ Detection time depends on Jeweller settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery : 4 × CR123A \/ Pre-installed.\u003c\/li\u003e\n\t\u003cli\u003eTool-free battery replacement : To replace the batteries, turn the battery compartment cover counterclockwise.\u003c\/li\u003e\n\t\u003cli\u003eReverse polarity protection : Prevents device damage if the batteries are put in incorrectly.\u003c\/li\u003e\n\t\u003cli\u003eRecommended battery type : Huiderui CR123A; 3 V; 1,600 mAh, LiMnO₂\u003c\/li\u003e\n\t\u003cli\u003eCalculated battery life : up to 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 145 × 145 × 51 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 561 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from –10 °C to +60 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 80%\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP54\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\t\u003cli\u003eColor : White\u003c\/li\u003e\n\t\u003cli\u003eComplete set : EN54 FireProtect (Sounder\/VAD) Jeweller \/ 4 × CR123A battery (pre-installed) \/ SmartBracket mounting panel \/ Installation kit \/ Quick start guide\u003c\/li\u003e\n\t\u003cli\u003eRevision  : 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959048064,"sku":"29489","price":259.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/30406023_1769855156.jpg?v=1790679273"},{"product_id":"ms-electronics-26772","title":"Ajax EN54 Fire Detection Siren\/Strobe (Sounder\/VAD) Red","description":"\u003cul\u003e\n\t\u003cli\u003eEN54 FireProtect (Sounder\/VAD) Jeweller is a wireless addressable fire alarm sounder combined with a visual alarm device (VAD). The device complies with EN 54 requirements and ensures alarm recognition in various environments, including noisy areas. Visual indication makes the alarm perceptible to people with hearing impairments.\u003c\/li\u003e\n\t\u003cli\u003eEN54 FireProtect (Sounder\/VAD) Jeweller operates as part of an Ajax system and communicates with control and indicating equipment (CIE) via secure Jeweller radio protocol. The communication range with the CIE is up to 1,700 m in an open space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCommunication\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e Jeweller communication technology : Proprietary wireless communication technology to transmit commands, alarms, and events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo-way communication.\u003c\/li\u003e\n\t\u003cli\u003eAdvanced sabotage protection.\u003c\/li\u003e\n\t\u003cli\u003eBlock encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eInstant notifications.\u003c\/li\u003e\n\t\u003cli\u003eRemote control and configuration in Ajax apps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFrequency bands : 866.0 – 866.5 MHz \/ 868.0 – 868.6 MHz \/ 868.7 – 869.2 MHz\u003cbr\u003e\n905.0 – 926.5 MHz \/ 915.85 – 926.5 MHz \/ 921.0 – 922.0 MHz\u003c\/p\u003e\n\n\u003cp\u003eDepends on the sales region.\u003c\/p\u003e\n\n\u003cp\u003eMaximum effective radiated power (ERP) : up to 20 mW \/ Automatic power control to reduce power consumption and radio interference.\u003c\/p\u003e\n\n\u003cp\u003eRadio signal modulation : GFSK\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eRadio communication range : up to 1,700 m \/ Between the device and control and indicating equipment (CIE) or a range extender in an open space.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data is protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlarm annunciation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAlarm type : acoustic and light \/ A sounder and LED frame.\u003c\/li\u003e\n\t\u003cli\u003eSound volume : up to 100 dB at a distance of 1 m \/ Adjusted by a PRO or user with admin rights in an Ajax app.\u003c\/li\u003e\n\t\u003cli\u003eSound pattern : 32 tones\u003c\/li\u003e\n\t\u003cli\u003eSound synchronization : An audible alarm is automatically synchronized on all devices with a sounder connected to the same CIE.\u003c\/li\u003e\n\t\u003cli\u003eFlash frequency : 90 ms ON \/ 1,910 ms OFF (cycle duration: 2,000 ms; frequency: 0.5 Hz)\u003c\/li\u003e\n\t\u003cli\u003eAlarm annunciation test : To check the sound and visual alarm signals to ensure fire alarm signals are clearly audible and visible in the premises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation recommendations : The device's recommended installation height is up to 3 m on the ceiling and up to 2.4 m on the wall. \/ The device is designed for outdoor and indoor use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSabotage protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper button : Fault notification when an attempt is made to remove the device from the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003eLock for SmartBracket : to secure the device on the SmartBracket mounting panel \/ When locked, the lock secures the device and prevents it from being removed without a special tool.\u003c\/li\u003e\n\t\u003cli\u003eProtection against spoofing : device authentication\u003c\/li\u003e\n\t\u003cli\u003eConnection loss detection : after 36 s \/ Detection time depends on Jeweller settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery : 4 × CR123A \/ Pre-installed.\u003c\/li\u003e\n\t\u003cli\u003eTool-free battery replacement : To replace the batteries, turn the battery compartment cover counterclockwise.\u003c\/li\u003e\n\t\u003cli\u003eReverse polarity protection : Prevents device damage if the batteries are put in incorrectly.\u003c\/li\u003e\n\t\u003cli\u003eRecommended battery type : Huiderui CR123A; 3 V; 1,600 mAh, LiMnO₂\u003c\/li\u003e\n\t\u003cli\u003eCalculated battery life : up to 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 145 × 145 × 51 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 561 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from –10 °C to +60 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 80%\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP54\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\t\u003cli\u003eColor : Red\u003c\/li\u003e\n\t\u003cli\u003eComplete set : EN54 FireProtect (Sounder\/VAD) Jeweller \/ 4 × CR123A battery (pre-installed) \/ SmartBracket mounting panel \/ Installation kit \/ Quick start guide\u003c\/li\u003e\n\t\u003cli\u003eRevision  : 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959080832,"sku":"29490","price":259.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/Gemini_Generated_Image_8otesf8otesf8ote.png?v=1790679274"},{"product_id":"ms-electronics-26771","title":"Ajax EN54 Fire Detection Siren\/Strobe (Sounder\/VAD) Black","description":"\u003cul\u003e\n\t\u003cli\u003eEN54 FireProtect (Sounder\/VAD) Jeweller is a wireless addressable fire alarm sounder combined with a visual alarm device (VAD). The device complies with EN 54 requirements and ensures alarm recognition in various environments, including noisy areas. Visual indication makes the alarm perceptible to people with hearing impairments.\u003c\/li\u003e\n\t\u003cli\u003eEN54 FireProtect (Sounder\/VAD) Jeweller operates as part of an Ajax system and communicates with control and indicating equipment (CIE) via secure Jeweller radio protocol. The communication range with the CIE is up to 1,700 m in an open space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCommunication\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e Jeweller communication technology : Proprietary wireless communication technology to transmit commands, alarms, and events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo-way communication.\u003c\/li\u003e\n\t\u003cli\u003eAdvanced sabotage protection.\u003c\/li\u003e\n\t\u003cli\u003eBlock encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eInstant notifications.\u003c\/li\u003e\n\t\u003cli\u003eRemote control and configuration in Ajax apps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFrequency bands : 866.0 – 866.5 MHz \/ 868.0 – 868.6 MHz \/ 868.7 – 869.2 MHz\u003cbr\u003e\n905.0 – 926.5 MHz \/ 915.85 – 926.5 MHz \/ 921.0 – 922.0 MHz\u003c\/p\u003e\n\n\u003cp\u003eDepends on the sales region.\u003c\/p\u003e\n\n\u003cp\u003eMaximum effective radiated power (ERP) : up to 20 mW \/ Automatic power control to reduce power consumption and radio interference.\u003c\/p\u003e\n\n\u003cp\u003eRadio signal modulation : GFSK\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eRadio communication range : up to 1,700 m \/ Between the device and control and indicating equipment (CIE) or a range extender in an open space.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data is protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlarm annunciation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAlarm type : acoustic and light \/ A sounder and LED frame.\u003c\/li\u003e\n\t\u003cli\u003eSound volume : up to 100 dB at a distance of 1 m \/ Adjusted by a PRO or user with admin rights in an Ajax app.\u003c\/li\u003e\n\t\u003cli\u003eSound pattern : 32 tones\u003c\/li\u003e\n\t\u003cli\u003eSound synchronization : An audible alarm is automatically synchronized on all devices with a sounder connected to the same CIE.\u003c\/li\u003e\n\t\u003cli\u003eFlash frequency : 90 ms ON \/ 1,910 ms OFF (cycle duration: 2,000 ms; frequency: 0.5 Hz)\u003c\/li\u003e\n\t\u003cli\u003eAlarm annunciation test : To check the sound and visual alarm signals to ensure fire alarm signals are clearly audible and visible in the premises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation recommendations : The device's recommended installation height is up to 3 m on the ceiling and up to 2.4 m on the wall. \/ The device is designed for outdoor and indoor use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSabotage protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper button : Fault notification when an attempt is made to remove the device from the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003eLock for SmartBracket : to secure the device on the SmartBracket mounting panel \/ When locked, the lock secures the device and prevents it from being removed without a special tool.\u003c\/li\u003e\n\t\u003cli\u003eProtection against spoofing : device authentication\u003c\/li\u003e\n\t\u003cli\u003eConnection loss detection : after 36 s \/ Detection time depends on Jeweller settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery : 4 × CR123A \/ Pre-installed.\u003c\/li\u003e\n\t\u003cli\u003eTool-free battery replacement : To replace the batteries, turn the battery compartment cover counterclockwise.\u003c\/li\u003e\n\t\u003cli\u003eReverse polarity protection : Prevents device damage if the batteries are put in incorrectly.\u003c\/li\u003e\n\t\u003cli\u003eRecommended battery type : Huiderui CR123A; 3 V; 1,600 mAh, LiMnO₂\u003c\/li\u003e\n\t\u003cli\u003eCalculated battery life : up to 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 145 × 145 × 51 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 561 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from –10 °C to +60 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 80%\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP54\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\t\u003cli\u003eColor : Black\u003c\/li\u003e\n\t\u003cli\u003eComplete set : EN54 FireProtect (Sounder\/VAD) Jeweller \/ 4 × CR123A battery (pre-installed) \/ SmartBracket mounting panel \/ Installation kit \/ Quick start guide\u003c\/li\u003e\n\t\u003cli\u003eRevision  : 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959113600,"sku":"29488","price":259.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/30406022_1769855143.jpg?v=1790679274"},{"product_id":"ms-electronics-26770","title":"Ajax EN54 Fire Detection Siren (Sounder) Red","description":"\u003cul\u003e\n\t\u003cli\u003eEN54 FireProtect (Sounder) Jeweller is a wireless addressable fire alarm sounder. The device complies with EN 54 requirements and ensures alarm recognition in various environments, including noisy areas.\u003c\/li\u003e\n\t\u003cli\u003eEN54 FireProtect (Sounder) Jeweller operates as part of an Ajax system and communicates with control and indicating equipment (CIE) via secure Jeweller radio protocol. The communication range with the CIE is up to 1,700 m in an open space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCommunication\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e Jeweller communication technology : Proprietary wireless communication technology to transmit commands, alarms, and events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo-way communication.\u003c\/li\u003e\n\t\u003cli\u003eAdvanced sabotage protection.\u003c\/li\u003e\n\t\u003cli\u003eBlock encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eInstant notifications.\u003c\/li\u003e\n\t\u003cli\u003eRemote control and configuration in Ajax apps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFrequency bands : 866.0 – 866.5 MHz \/ 868.0 – 868.6 MHz \/ 868.7 – 869.2 MHz \/ 905.0 – 926.5 MHz \/ 915.85 – 926.5 MHz \/ 921.0 – 922.0 MHz\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMaximum effective radiated power (ERP) : up to 20 mW \/ Automatic power control to reduce power consumption and radio interference.\u003c\/li\u003e\n\t\u003cli\u003eRadio signal modulation : GFSK\u003c\/li\u003e\n\t\u003cli\u003eRadio communication range : up to 1,700 mBetween the device and control and indicating equipment (CIE) or a range extender in an open space.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data is protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlarm annunciation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAlarm type : acoustic\u003c\/li\u003e\n\t\u003cli\u003eSound volume : up to 100 dB at a distance of 1 m \/ Adjusted by a PRO or user with admin rights in an Ajax app.\u003c\/li\u003e\n\t\u003cli\u003eSound pattern : 32 tones\u003c\/li\u003e\n\t\u003cli\u003eSound synchronization : An audible alarm is automatically synchronized on all devices with a sounder connected to the same CIE.\u003c\/li\u003e\n\t\u003cli\u003eAlarm annunciation test : An audible alarm check to ensure the fire alarm is clearly audible on the premises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation recommendations : Follow your local fire safety regulations when selecting the device's installation site.\u003c\/strong\u003e \/ \u003cstrong\u003eThe device is designed for outdoor and indoor use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSabotage protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper button : Fault notification when an attempt is made to remove the device from the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003e Lock for SmartBracket : to secure the device on the SmartBracket mounting panel \/ When locked, the lock secures the device and prevents it from being removed without a special tool.\u003c\/li\u003e\n\t\u003cli\u003eProtection against spoofing : device authentication\u003c\/li\u003e\n\t\u003cli\u003eConnection loss detection : after 36 s \/ Detection time depends on Jeweller settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery : 4 × CR123A \/ Pre-installed.\u003c\/li\u003e\n\t\u003cli\u003eTool-free battery replacement : To replace the batteries, turn the battery compartment cover counterclockwise.\u003c\/li\u003e\n\t\u003cli\u003eReverse polarity protection : Prevents device damage if the batteries are put in incorrectly.\u003c\/li\u003e\n\t\u003cli\u003eRecommended battery type : Huiderui CR123A; 3 V; 1,600 mAh, LiMnO₂\u003c\/li\u003e\n\t\u003cli\u003eCalculated battery life : up to 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 145 × 145 × 51 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 527 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from –10 °C to +60 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 80%\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP54\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eColor : Red\u003c\/li\u003e\n\t\u003cli\u003eComplete set : EN54 FireProtect (Sounder) Jeweller \/ 4 × CR123A battery (pre-installed) \/ SmartBracket mounting panel \/ Installation kit \/ Quick start guide\u003c\/li\u003e\n\t\u003cli\u003eRevision : 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959179136,"sku":"29491","price":199.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/30406027.jpg?v=1790679274"},{"product_id":"ms-electronics-26769","title":"Ajax EN54 Fire Detection Strobe (VAD) Red","description":"\u003cul\u003e\n\t\u003cli\u003eEN54 FireProtect (VAD) Jeweller is a wireless addressable visual fire alarm device (VAD). The device complies with EN 54 requirements and ensures alarm recognition in various environments, including noisy areas. Visual indication makes the alarm perceptible to people with hearing impairments.\u003c\/li\u003e\n\t\u003cli\u003eEN54 FireProtect (VAD) Jeweller operates as part of an Ajax system and communicates with control and indicating equipment (CIE) via secure Jeweller radio protocol. The communication range with the CIE is up to 1,700 m in an open space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCommunication\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e Jeweller communication technology : Proprietary wireless communication technology to transmit commands, alarms, and events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo-way communication.\u003c\/li\u003e\n\t\u003cli\u003eAdvanced sabotage protection.\u003c\/li\u003e\n\t\u003cli\u003eBlock encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eInstant notifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFrequency bands : 866.0 – 866.5 MHz \/ 868.0 – 868.6 MHz \/ 868.7 – 869.2 MHz \/ 905.0 – 926.5 MHz \/ 915.85 – 926.5 MHz \/ 921.0 – 922.0 MHz\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMaximum effective radiated power (ERP) : up to 20 mW \/ Automatic power control to reduce power consumption and radio interference.\u003c\/li\u003e\n\t\u003cli\u003eRadio signal modulation : GFSK\u003c\/li\u003e\n\t\u003cli\u003eRadio communication range : up to 1,700 m \/ Between the device and control and indicating equipment (CIE) or a range extender in an open space.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data is protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlarm annunciation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAlarm type : light \/ LED frame.\u003c\/li\u003e\n\t\u003cli\u003eFlash frequency : 90 ms ON \/ 1,910 ms OFF (cycle duration: 2,000 ms; frequency: 0.5 Hz)\u003c\/li\u003e\n\t\u003cli\u003eAlarm annunciation test : To check the visual alarm signal to ensure fire alarm signals are visible in the premises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation recommendations : The device's recommended installation height is up to 3 m on the ceiling and up to 2.4 m on the wall. \/ The device is designed for outdoor and indoor use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSabotage protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper button : Fault notification when an attempt is made to remove the device from the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003eLock for SmartBracket : to secure the device on the SmartBracket mounting panel \/ When locked, the lock secures the device and prevents it from being removed without a special tool.\u003c\/li\u003e\n\t\u003cli\u003eProtection against spoofing : device authentication\u003c\/li\u003e\n\t\u003cli\u003eConnection loss detection : after 36 s \/ Detection time depends on Jeweller settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery : 4 × CR123A \/ Pre-installed.\u003c\/li\u003e\n\t\u003cli\u003eTool-free battery replacement : To replace the batteries, turn the battery compartment cover counterclockwise.\u003c\/li\u003e\n\t\u003cli\u003eReverse polarity protection : Prevents device damage if the batteries are put in incorrectly.\u003c\/li\u003e\n\t\u003cli\u003eRecommended battery type : Huiderui CR123A; 3 V; 1,600 mAh, LiMnO₂\u003c\/li\u003e\n\t\u003cli\u003eCalculated battery life : up to 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 145 × 145 × 51 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 509 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from –10 °C to +60 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 80%\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP54\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\t\u003cli\u003eColor : Red\u003c\/li\u003e\n\t\u003cli\u003eComplete set : EN54 FireProtect (VAD) Jeweller \/ 4 × CR123A battery (pre-installed) \/ SmartBracket mounting panel \/ Installation kit \/ Quick start guide\u003c\/li\u003e\n\t\u003cli\u003eRevision : 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959211904,"sku":"29487","price":213.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/68c1648266577_fireprotectvadred_Photoroom_359a.jpg?v=1790679275"},{"product_id":"ms-electronics-26768","title":"Ajax EN54 Fire Detection (Smoke\/Sounder) White","description":"\u003cul\u003e\n\t\u003cli\u003eThe unique smoke chamber, dual-spectrum optical sensor, and proprietary HazeFlow 2 software algorithm guarantee the speed and accuracy of fire detection.\u003c\/li\u003e\n\t\u003cli\u003eThe smoke chamber is hardwired with a dual-spectrum optical sensor that has blue and infrared LEDs with different wavelengths. It measures the microparticle concentration in the air to determine the size of the volatile particles inside the chamber and responds only to smoke.\u003c\/li\u003e\n\t\u003cli\u003eThe HazeFlow 2 algorithm analyses and compares data from the dual-spectrum optical sensor to a specified pattern to define smoke from vapor or steam. The detector instantly raises the alarm when pattern dynamics indicate a real case of fire.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCommunication\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e Jeweller communication technology\u003c\/li\u003e\n\t\u003cli\u003eProprietary wireless communication technology to transmit commands, alarms, and events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo-way communication.\u003c\/li\u003e\n\t\u003cli\u003eAdvanced sabotage protection.\u003c\/li\u003e\n\t\u003cli\u003eBlock encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eInstant notifications.\u003c\/li\u003e\n\t\u003cli\u003eRemote control and configuration in Ajax apps.\u003c\/li\u003e\n\t\u003cli\u003eFrequency bands : 866.0–866.5 MHz \/ 868.0–868.6 MHz \/ 868.7–869.2 MHz \/ 905.0–926.5 MHz \/ 915.85–926.5 MHz \/ 921.0–922.0 MHz\u003c\/li\u003e\n\t\u003cli\u003eMaximum effective radiated power (ERP) : up to 20 mW \/ Automatic power control to reduce power consumption and radio interference.\u003c\/li\u003e\n\t\u003cli\u003eRadio signal modulation : GFSK\u003c\/li\u003e\n\t\u003cli\u003eRadio communication range : up to 1,700 m \/ Between the device and control and indicating equipment (CIE) or a range extender in an open space.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data is protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eSmoke detection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSensitive element : dual-spectrum optical sensor \/ Detects smoke based on the size of particles in the air.\u003c\/li\u003e\n\t\u003cli\u003eFalse alarm protection : The device does not respond to water vapor.\u003c\/li\u003e\n\t\u003cli\u003ePatented smoke chamber : Protects the smoke sensor from dust, dirt, and insects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlarm annunciation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAlarm type : acoustic\u003c\/li\u003e\n\t\u003cli\u003eSound volume : up to 95 dB at a distance of 1 m \/ Adjusted by a PRO or user with admin rights in an Ajax app.\u003c\/li\u003e\n\t\u003cli\u003eSound pattern : 32 tones\u003c\/li\u003e\n\t\u003cli\u003eSound synchronization : An audible alarm is automatically synchronized on all devices with a sounder connected to the same CIE.\u003c\/li\u003e\n\t\u003cli\u003eAlarm annunciation test : An audible alarm check to ensure the fire alarm is clearly audible on the premises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation recommendations : The device is designed for indoor use only.\u003c\/strong\u003e \/ \u003cstrong\u003eThe SmartBracket mounting panel allows the detector to be rotated up to 90° even after installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSabotage protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper button \/ Fault notification when an attempt is made to remove the device from the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003eLock for SmartBracket : to secure the device on the SmartBracket mounting panel \/ When locked, the lock secures the device and prevents it from being removed without a special tool.\u003c\/li\u003e\n\t\u003cli\u003eProtection against spoofing : device authentication\u003c\/li\u003e\n\t\u003cli\u003eConnection loss detection : after 36 s \/ Detection time depends on Jeweller settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery : 2 × CR123A \/ Pre-installed.\u003c\/li\u003e\n\t\u003cli\u003eTool-free battery replacement : To replace the batteries, open the lids of the battery compartments.\u003c\/li\u003e\n\t\u003cli\u003eReverse polarity protection : Prevents device damage if the batteries are put in incorrectly.\u003c\/li\u003e\n\t\u003cli\u003eRecommended battery type : Huiderui CR123A; 3 V; 1,600 mAh, LiMnO₂\u003c\/li\u003e\n\t\u003cli\u003eCalculated battery life : up to 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 124 × 124 × 48 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 295 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from 0 °C to +50 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 80%\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP21C\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\t\u003cli\u003eColor : Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eComplete set\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEN54 FireProtect (Smoke\/Sounder) Jeweller\u003c\/li\u003e\n\t\u003cli\u003eSmartBracket mounting panel\u003c\/li\u003e\n\t\u003cli\u003e2 × CR123A battery (pre-installed)\u003c\/li\u003e\n\t\u003cli\u003eInstallation kit\u003c\/li\u003e\n\t\u003cli\u003eQuick start guide\u003c\/li\u003e\n\t\u003cli\u003eRevision : 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959244672,"sku":"29484","price":132.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/119921-3_1769761222.jpg?v=1790679275"},{"product_id":"ms-electronics-26767","title":"Ajax EN54 Fire Detection (Smoke\/Sounder) Black","description":"\u003cul\u003e\n\t\u003cli\u003eThe unique smoke chamber, dual-spectrum optical sensor, and proprietary HazeFlow 2 software algorithm guarantee the speed and accuracy of fire detection.\u003c\/li\u003e\n\t\u003cli\u003eThe smoke chamber is hardwired with a dual-spectrum optical sensor that has blue and infrared LEDs with different wavelengths. It measures the microparticle concentration in the air to determine the size of the volatile particles inside the chamber and responds only to smoke.\u003c\/li\u003e\n\t\u003cli\u003eThe HazeFlow 2 algorithm analyses and compares data from the dual-spectrum optical sensor to a specified pattern to define smoke from vapor or steam. The detector instantly raises the alarm when pattern dynamics indicate a real case of fire.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCommunication\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e Jeweller communication technology\u003c\/li\u003e\n\t\u003cli\u003eProprietary wireless communication technology to transmit commands, alarms, and events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo-way communication.\u003c\/li\u003e\n\t\u003cli\u003eAdvanced sabotage protection.\u003c\/li\u003e\n\t\u003cli\u003eBlock encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eInstant notifications.\u003c\/li\u003e\n\t\u003cli\u003eRemote control and configuration in Ajax apps.\u003c\/li\u003e\n\t\u003cli\u003eFrequency bands : 866.0–866.5 MHz \/ 868.0–868.6 MHz \/ 868.7–869.2 MHz \/ 905.0–926.5 MHz \/ 915.85–926.5 MHz \/ 921.0–922.0 MHz\u003c\/li\u003e\n\t\u003cli\u003eMaximum effective radiated power (ERP) : up to 20 mW \/ Automatic power control to reduce power consumption and radio interference.\u003c\/li\u003e\n\t\u003cli\u003eRadio signal modulation : GFSK\u003c\/li\u003e\n\t\u003cli\u003eRadio communication range : up to 1,700 m \/ Between the device and control and indicating equipment (CIE) or a range extender in an open space.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data is protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eSmoke detection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSensitive element : dual-spectrum optical sensor \/ Detects smoke based on the size of particles in the air.\u003c\/li\u003e\n\t\u003cli\u003eFalse alarm protection : The device does not respond to water vapor.\u003c\/li\u003e\n\t\u003cli\u003ePatented smoke chamber : Protects the smoke sensor from dust, dirt, and insects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlarm annunciation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAlarm type : acoustic\u003c\/li\u003e\n\t\u003cli\u003eSound volume : up to 95 dB at a distance of 1 m \/ Adjusted by a PRO or user with admin rights in an Ajax app.\u003c\/li\u003e\n\t\u003cli\u003eSound pattern : 32 tones\u003c\/li\u003e\n\t\u003cli\u003eSound synchronization : An audible alarm is automatically synchronized on all devices with a sounder connected to the same CIE.\u003c\/li\u003e\n\t\u003cli\u003eAlarm annunciation test : An audible alarm check to ensure the fire alarm is clearly audible on the premises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation recommendations : The device is designed for indoor use only.\u003c\/strong\u003e \/ \u003cstrong\u003eThe SmartBracket mounting panel allows the detector to be rotated up to 90° even after installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSabotage protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper button \/ Fault notification when an attempt is made to remove the device from the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003eLock for SmartBracket : to secure the device on the SmartBracket mounting panel \/ When locked, the lock secures the device and prevents it from being removed without a special tool.\u003c\/li\u003e\n\t\u003cli\u003eProtection against spoofing : device authentication\u003c\/li\u003e\n\t\u003cli\u003eConnection loss detection : after 36 s \/ Detection time depends on Jeweller settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery : 2 × CR123A \/ Pre-installed.\u003c\/li\u003e\n\t\u003cli\u003eTool-free battery replacement : To replace the batteries, open the lids of the battery compartments.\u003c\/li\u003e\n\t\u003cli\u003eReverse polarity protection : Prevents device damage if the batteries are put in incorrectly.\u003c\/li\u003e\n\t\u003cli\u003eRecommended battery type : Huiderui CR123A; 3 V; 1,600 mAh, LiMnO₂\u003c\/li\u003e\n\t\u003cli\u003eCalculated battery life : up to 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 124 × 124 × 48 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 295 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from 0 °C to +50 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 80%\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP21C\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\t\u003cli\u003eColor : Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eComplete set\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEN54 FireProtect (Smoke\/Sounder) Jeweller\u003c\/li\u003e\n\t\u003cli\u003eSmartBracket mounting panel\u003c\/li\u003e\n\t\u003cli\u003e2 × CR123A battery (pre-installed)\u003c\/li\u003e\n\t\u003cli\u003eInstallation kit\u003c\/li\u003e\n\t\u003cli\u003eQuick start guide\u003c\/li\u003e\n\t\u003cli\u003eRevision : 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959310208,"sku":"29483","price":132.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/Ajax-EN54-FireProtect-Detectors-Jeweller-Black_1769761071.jpg?v=1790679276"},{"product_id":"ms-electronics-26766","title":"Ajax EN54 Fire Detection (Heat\/Sounder) White","description":"\u003cul\u003e\n\t\u003cli\u003eEN54 FireProtect Jeweller detectors combine certified reliability with effortless installation. This wireless series includes addressable point smoke and heat detectors, some of them combined with built-in fire alarm sounders. Each detector provides best-in-class detection accuracy thanks to Ajax's patented smoke chamber with a dual-spectrum optical sensor and two accurate thermistors. With built-in communicators, long battery life, and stable radio communication, the devices are ready for different-scale projects. No need to open the enclosure or run cables — installation and configuration take just minutes via Ajax apps. Early service notifications and automated maintenance reports via Ajax PRO Desktop ensure the system stays easy to support for years.\u003c\/li\u003e\n\t\u003cli\u003eTwo built-in thermistors detect a rapid temperature rise or threshold exceedance. They trigger an alarm when a rapid temperature increase or static temperature is detected. Heat detector modes — A1, A1R, A1S, B, BR, BS, C, CR, CS, or a fixed temperature2 — can be selected in an Ajax app.\u003c\/li\u003e\n\t\u003cli\u003eThis approach ensures fast and accurate detection of flaming fires or heat build-up caused by smoldering, which is critical for timely response.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCommunication\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e Jeweller communication technology\u003c\/li\u003e\n\t\u003cli\u003eProprietary wireless communication technology to transmit commands, alarms, and events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo-way communication.\u003c\/li\u003e\n\t\u003cli\u003eAdvanced sabotage protection.\u003c\/li\u003e\n\t\u003cli\u003eBlock encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eInstant notifications.\u003c\/li\u003e\n\t\u003cli\u003eRemote control and configuration in Ajax apps.\u003c\/li\u003e\n\t\u003cli\u003eFrequency bands : 866.0–866.5 MHz \/ 868.0–868.6 MHz \/ 868.7–869.2 MHz \/ 905.0–926.5 MHz \/ 915.85–926.5 MHz \/ 921.0–922.0 MHz\u003c\/li\u003e\n\t\u003cli\u003eMaximum effective radiated power (ERP) : up to 20 mW \/ Automatic power control to reduce power consumption and radio interference.\u003c\/li\u003e\n\t\u003cli\u003eRadio signal modulation : GFSK\u003c\/li\u003e\n\t\u003cli\u003eRadio communication range : up to 1,700 m \/ Between the device and control and indicating equipment (CIE) or a range extender in an open space.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data is protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eDangerous temperature detection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSensitive element : 2 × thermistor \/ According to the EN 54-5 requirements for heat detectors of Class A1, B, and C with rate-of-rise (R) and static (S) response types.\u003c\/li\u003e\n\t\u003cli\u003eHeat sensor modes : A1, A1R, A1S \/ B, BR, BS \/ C, CR, CS \/ Fixed temperature \/ For better detection of fire hazards, depending on the installation site of the device. Can be selected in the device settings. Only the following heat sensor modes are compliant with EN 54 requirements: A1R, A1S, BR, BS, CR, and CS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlarm annunciation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAlarm type : acoustic\u003c\/li\u003e\n\t\u003cli\u003eSound volume : up to 95 dB at a distance of 1 m \/ Adjusted by a PRO or user with admin rights in an Ajax app.\u003c\/li\u003e\n\t\u003cli\u003eSound pattern : 32 tones\u003c\/li\u003e\n\t\u003cli\u003eSound synchronization : An audible alarm is automatically synchronized on all devices with a sounder connected to the same CIE.\u003c\/li\u003e\n\t\u003cli\u003eAlarm annunciation test : An audible alarm check to ensure the fire alarm is clearly audible on the premises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation recommendations : The device is designed for indoor use only.\u003c\/strong\u003e \/ \u003cstrong\u003eThe SmartBracket mounting panel allows the detector to be rotated up to 90° even after installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSabotage protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper button \/ Fault notification when an attempt is made to remove the device from the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003eLock for SmartBracket : to secure the device on the SmartBracket mounting panel \/ When locked, the lock secures the device and prevents it from being removed without a special tool.\u003c\/li\u003e\n\t\u003cli\u003eProtection against spoofing : device authentication\u003c\/li\u003e\n\t\u003cli\u003eConnection loss detection : after 36 s \/ Detection time depends on Jeweller settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery : 2 × CR123A \/ Pre-installed.\u003c\/li\u003e\n\t\u003cli\u003eTool-free battery replacement : To replace the batteries, open the lids of the battery compartments.\u003c\/li\u003e\n\t\u003cli\u003eReverse polarity protection : Prevents device damage if the batteries are put in incorrectly.\u003c\/li\u003e\n\t\u003cli\u003eRecommended battery type : Huiderui CR123A; 3 V; 1,600 mAh, LiMnO₂\u003c\/li\u003e\n\t\u003cli\u003eCalculated battery life : up to 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 124 × 124 × 48 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 278 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from 0 °C to +50 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 80%\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP21C\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\t\u003cli\u003eColor : White\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eComplete set\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEN54 FireProtect (Heat\/Sounder) Jeweller\u003c\/li\u003e\n\t\u003cli\u003eSmartBracket mounting panel\u003c\/li\u003e\n\t\u003cli\u003e2 × CR123A battery (pre-installed)\u003c\/li\u003e\n\t\u003cli\u003eInstallation kit\u003c\/li\u003e\n\t\u003cli\u003eQuick start guide\u003c\/li\u003e\n\t\u003cli\u003eRevision : 2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959342976,"sku":"29486","price":118.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/119921-3.jpg?v=1790679276"},{"product_id":"ms-electronics-26765","title":"Ajax EN54 Fire Detection (Heat\/Sounder) Black","description":"\u003cul\u003e\n\t\u003cli\u003eEN54 FireProtect Jeweller detectors combine certified reliability with effortless installation. This wireless series includes addressable point smoke and heat detectors, some of them combined with built-in fire alarm sounders. Each detector provides best-in-class detection accuracy thanks to Ajax's patented smoke chamber with a dual-spectrum optical sensor and two accurate thermistors. With built-in communicators, long battery life, and stable radio communication, the devices are ready for different-scale projects. No need to open the enclosure or run cables — installation and configuration take just minutes via Ajax apps. Early service notifications and automated maintenance reports via Ajax PRO Desktop ensure the system stays easy to support for years.\u003c\/li\u003e\n\t\u003cli\u003eTwo built-in thermistors detect a rapid temperature rise or threshold exceedance. They trigger an alarm when a rapid temperature increase or static temperature is detected. Heat detector modes — A1, A1R, A1S, B, BR, BS, C, CR, CS, or a fixed temperature2 — can be selected in an Ajax app.\u003c\/li\u003e\n\t\u003cli\u003eThis approach ensures fast and accurate detection of flaming fires or heat build-up caused by smoldering, which is critical for timely response.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCommunication\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e Jeweller communication technology\u003c\/li\u003e\n\t\u003cli\u003eProprietary wireless communication technology to transmit commands, alarms, and events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo-way communication.\u003c\/li\u003e\n\t\u003cli\u003eAdvanced sabotage protection.\u003c\/li\u003e\n\t\u003cli\u003eBlock encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eInstant notifications.\u003c\/li\u003e\n\t\u003cli\u003eRemote control and configuration in Ajax apps.\u003c\/li\u003e\n\t\u003cli\u003eFrequency bands : 866.0–866.5 MHz \/ 868.0–868.6 MHz \/ 868.7–869.2 MHz \/ 905.0–926.5 MHz \/ 915.85–926.5 MHz \/ 921.0–922.0 MHz\u003c\/li\u003e\n\t\u003cli\u003eMaximum effective radiated power (ERP) : up to 20 mW \/ Automatic power control to reduce power consumption and radio interference.\u003c\/li\u003e\n\t\u003cli\u003eRadio signal modulation : GFSK\u003c\/li\u003e\n\t\u003cli\u003eRadio communication range : up to 1,700 m \/ Between the device and control and indicating equipment (CIE) or a range extender in an open space.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data is protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eDangerous temperature detection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSensitive element : 2 × thermistor \/ According to the EN 54-5 requirements for heat detectors of Class A1, B, and C with rate-of-rise (R) and static (S) response types.\u003c\/li\u003e\n\t\u003cli\u003eHeat sensor modes : A1, A1R, A1S \/ B, BR, BS \/ C, CR, CS \/ Fixed temperature \/ For better detection of fire hazards, depending on the installation site of the device. Can be selected in the device settings. Only the following heat sensor modes are compliant with EN 54 requirements: A1R, A1S, BR, BS, CR, and CS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlarm annunciation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAlarm type : acoustic\u003c\/li\u003e\n\t\u003cli\u003eSound volume : up to 95 dB at a distance of 1 m \/ Adjusted by a PRO or user with admin rights in an Ajax app.\u003c\/li\u003e\n\t\u003cli\u003eSound pattern : 32 tones\u003c\/li\u003e\n\t\u003cli\u003eSound synchronization : An audible alarm is automatically synchronized on all devices with a sounder connected to the same CIE.\u003c\/li\u003e\n\t\u003cli\u003eAlarm annunciation test : An audible alarm check to ensure the fire alarm is clearly audible on the premises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation recommendations : The device is designed for indoor use only.\u003c\/strong\u003e \/ \u003cstrong\u003eThe SmartBracket mounting panel allows the detector to be rotated up to 90° even after installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSabotage protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper button \/ Fault notification when an attempt is made to remove the device from the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003eLock for SmartBracket : to secure the device on the SmartBracket mounting panel \/ When locked, the lock secures the device and prevents it from being removed without a special tool.\u003c\/li\u003e\n\t\u003cli\u003eProtection against spoofing : device authentication\u003c\/li\u003e\n\t\u003cli\u003eConnection loss detection : after 36 s \/ Detection time depends on Jeweller settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery : 2 × CR123A \/ Pre-installed.\u003c\/li\u003e\n\t\u003cli\u003eTool-free battery replacement : To replace the batteries, open the lids of the battery compartments.\u003c\/li\u003e\n\t\u003cli\u003eReverse polarity protection : Prevents device damage if the batteries are put in incorrectly.\u003c\/li\u003e\n\t\u003cli\u003eRecommended battery type : Huiderui CR123A; 3 V; 1,600 mAh, LiMnO₂\u003c\/li\u003e\n\t\u003cli\u003eCalculated battery life : up to 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 124 × 124 × 48 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 278 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from 0 °C to +50 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 80%\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP21C\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\t\u003cli\u003eColor : Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eComplete set\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEN54 FireProtect (Heat\/Sounder) Jeweller\u003c\/li\u003e\n\t\u003cli\u003eSmartBracket mounting panel\u003c\/li\u003e\n\t\u003cli\u003e2 × CR123A battery (pre-installed)\u003c\/li\u003e\n\t\u003cli\u003eInstallation kit\u003c\/li\u003e\n\t\u003cli\u003eQuick start guide\u003c\/li\u003e\n\t\u003cli\u003eRevision : 2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959375744,"sku":"29485","price":118.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/Ajax-EN54-FireProtect-Detectors-Jeweller-Black.jpg?v=1790679277"},{"product_id":"ms-electronics-26764","title":"Ajax EN54 FireProtect Smoke White","description":"\u003cul\u003e\n\t\u003cli\u003eEN54 FireProtect (Smoke) Jeweller is a wireless addressable point smoke detector. The device complies with EN 54 requirements and ensures smoke detection if signs of smoke are present.\u003c\/li\u003e\n\t\u003cli\u003eEN54 FireProtect (Smoke) Jeweller operates as part of an Ajax system and communicates with control and indicating equipment (CIE) via secure Jeweller radio protocol. The communication range with the CIE is up to 1,700 m in an open space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCommunication\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e Jeweller communication technology\u003c\/li\u003e\n\t\u003cli\u003eProprietary wireless communication technology to transmit commands, alarms, and events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo-way communication.\u003c\/li\u003e\n\t\u003cli\u003eAdvanced sabotage protection.\u003c\/li\u003e\n\t\u003cli\u003eBlock encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eInstant notifications.\u003c\/li\u003e\n\t\u003cli\u003eRemote control and configuration in Ajax apps.\u003c\/li\u003e\n\t\u003cli\u003eFrequency bands : 866.0–866.5 MHz \/ 868.0–868.6 MHz \/ 868.7–869.2 MHz \/ 905.0–926.5 MHz \/ 915.85–926.5 MHz \/ 921.0–922.0 MHz\u003c\/li\u003e\n\t\u003cli\u003eMaximum effective radiated power (ERP) : up to 20 mW \/ Automatic power control to reduce power consumption and radio interference.\u003c\/li\u003e\n\t\u003cli\u003eRadio signal modulation : GFSK\u003c\/li\u003e\n\t\u003cli\u003eRadio communication range : up to 1,700 m \/ Between the device and control and indicating equipment (CIE) or a range extender in an open space.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data is protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eSmoke detection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSensitive element : dual-spectrum optical sensor \/ Detects smoke based on the size of particles in the air.\u003c\/li\u003e\n\t\u003cli\u003eFalse alarm protection : The device does not respond to water vapor.\u003c\/li\u003e\n\t\u003cli\u003ePatented smoke chamber : Protects the smoke sensor from dust, dirt, and insects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlarm annunciation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAlarm type : acoustic\u003c\/li\u003e\n\t\u003cli\u003eSound volume : up to 95 dB at a distance of 1 m \/ Adjusted by a PRO or user with admin rights in an Ajax app.\u003c\/li\u003e\n\t\u003cli\u003eSound pattern : 32 tones\u003c\/li\u003e\n\t\u003cli\u003eSound synchronization : An audible alarm is automatically synchronized on all devices with a sounder connected to the same CIE.\u003c\/li\u003e\n\t\u003cli\u003eAlarm annunciation test : An audible alarm check to ensure the fire alarm is clearly audible on the premises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation recommendations : The device is designed for indoor use only.\u003c\/strong\u003e \/ \u003cstrong\u003eThe SmartBracket mounting panel allows the detector to be rotated up to 90° even after installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSabotage protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper button \/ Fault notification when an attempt is made to remove the device from the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003eLock for SmartBracket : to secure the device on the SmartBracket mounting panel \/ When locked, the lock secures the device and prevents it from being removed without a special tool.\u003c\/li\u003e\n\t\u003cli\u003eProtection against spoofing : device authentication\u003c\/li\u003e\n\t\u003cli\u003eConnection loss detection : after 36 s \/ Detection time depends on Jeweller settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery : 2 × CR123A \/ Pre-installed.\u003c\/li\u003e\n\t\u003cli\u003eTool-free battery replacement : To replace the batteries, open the lids of the battery compartments.\u003c\/li\u003e\n\t\u003cli\u003eReverse polarity protection : Prevents device damage if the batteries are put in incorrectly.\u003c\/li\u003e\n\t\u003cli\u003eRecommended battery type : Huiderui CR123A; 3 V; 1,600 mAh, LiMnO₂\u003c\/li\u003e\n\t\u003cli\u003eCalculated battery life : up to 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 124 × 124 × 48 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 295 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from 0 °C to +50 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 80%\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP21C\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\t\u003cli\u003eColor : White\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eComplete set\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEN54 FireProtect (Smoke\/Sounder) Jeweller\u003c\/li\u003e\n\t\u003cli\u003eSmartBracket mounting panel\u003c\/li\u003e\n\t\u003cli\u003e2 × CR123A battery (pre-installed)\u003c\/li\u003e\n\t\u003cli\u003eInstallation kit\u003c\/li\u003e\n\t\u003cli\u003eQuick start guide\u003c\/li\u003e\n\t\u003cli\u003eRevision : 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959539584,"sku":"29482","price":112.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/119921-3_e1a4f02f-ab42-47da-8f82-df7176ee5e79.jpg?v=1790679279"},{"product_id":"ms-electronics-26763","title":"Ajax EN54 FireProtect Smoke black","description":"\u003cul\u003e\n\t\u003cli\u003eEN54 FireProtect (Smoke) Jeweller is a wireless addressable point smoke detector. The device complies with EN 54 requirements and ensures smoke detection if signs of smoke are present.\u003c\/li\u003e\n\t\u003cli\u003eEN54 FireProtect (Smoke) Jeweller operates as part of an Ajax system and communicates with control and indicating equipment (CIE) via secure Jeweller radio protocol. The communication range with the CIE is up to 1,700 m in an open space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCommunication\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e Jeweller communication technology\u003c\/li\u003e\n\t\u003cli\u003eProprietary wireless communication technology to transmit commands, alarms, and events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo-way communication.\u003c\/li\u003e\n\t\u003cli\u003eAdvanced sabotage protection.\u003c\/li\u003e\n\t\u003cli\u003eBlock encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eInstant notifications.\u003c\/li\u003e\n\t\u003cli\u003eRemote control and configuration in Ajax apps.\u003c\/li\u003e\n\t\u003cli\u003eFrequency bands : 866.0–866.5 MHz \/ 868.0–868.6 MHz \/ 868.7–869.2 MHz \/ 905.0–926.5 MHz \/ 915.85–926.5 MHz \/ 921.0–922.0 MHz\u003c\/li\u003e\n\t\u003cli\u003eMaximum effective radiated power (ERP) : up to 20 mW \/ Automatic power control to reduce power consumption and radio interference.\u003c\/li\u003e\n\t\u003cli\u003eRadio signal modulation : GFSK\u003c\/li\u003e\n\t\u003cli\u003eRadio communication range : up to 1,700 m \/ Between the device and control and indicating equipment (CIE) or a range extender in an open space.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data is protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eSmoke detection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSensitive element : dual-spectrum optical sensor \/ Detects smoke based on the size of particles in the air.\u003c\/li\u003e\n\t\u003cli\u003eFalse alarm protection : The device does not respond to water vapor.\u003c\/li\u003e\n\t\u003cli\u003ePatented smoke chamber : Protects the smoke sensor from dust, dirt, and insects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlarm annunciation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAlarm type : acoustic\u003c\/li\u003e\n\t\u003cli\u003eSound volume : up to 95 dB at a distance of 1 m \/ Adjusted by a PRO or user with admin rights in an Ajax app.\u003c\/li\u003e\n\t\u003cli\u003eSound pattern : 32 tones\u003c\/li\u003e\n\t\u003cli\u003eSound synchronization : An audible alarm is automatically synchronized on all devices with a sounder connected to the same CIE.\u003c\/li\u003e\n\t\u003cli\u003eAlarm annunciation test : An audible alarm check to ensure the fire alarm is clearly audible on the premises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation recommendations : The device is designed for indoor use only.\u003c\/strong\u003e \/ \u003cstrong\u003eThe SmartBracket mounting panel allows the detector to be rotated up to 90° even after installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSabotage protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper button \/ Fault notification when an attempt is made to remove the device from the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003eLock for SmartBracket : to secure the device on the SmartBracket mounting panel \/ When locked, the lock secures the device and prevents it from being removed without a special tool.\u003c\/li\u003e\n\t\u003cli\u003eProtection against spoofing : device authentication\u003c\/li\u003e\n\t\u003cli\u003eConnection loss detection : after 36 s \/ Detection time depends on Jeweller settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery : 2 × CR123A \/ Pre-installed.\u003c\/li\u003e\n\t\u003cli\u003eTool-free battery replacement : To replace the batteries, open the lids of the battery compartments.\u003c\/li\u003e\n\t\u003cli\u003eReverse polarity protection : Prevents device damage if the batteries are put in incorrectly.\u003c\/li\u003e\n\t\u003cli\u003eRecommended battery type : Huiderui CR123A; 3 V; 1,600 mAh, LiMnO₂\u003c\/li\u003e\n\t\u003cli\u003eCalculated battery life : up to 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 124 × 124 × 48 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 295 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from 0 °C to +50 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 80%\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP21C\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\t\u003cli\u003eColor : Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eComplete set\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEN54 FireProtect (Smoke) Jeweller\u003c\/li\u003e\n\t\u003cli\u003eSmartBracket mounting panel\u003c\/li\u003e\n\t\u003cli\u003e2 × CR123A battery (pre-installed)\u003c\/li\u003e\n\t\u003cli\u003eInstallation kit\u003c\/li\u003e\n\t\u003cli\u003eQuick start guide\u003c\/li\u003e\n\t\u003cli\u003eRevision : 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959572352,"sku":"29481","price":112.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/Ajax-EN54-FireProtect-Detectors-Jeweller-Black_030c70b7-cfb3-4f27-97e0-c86e909d4953.jpg?v=1790679280"},{"product_id":"ms-electronics-26762","title":"Ajax EN54 Fire Detection Rex White","description":"\u003cul\u003e\n\t\u003cli\u003eEN54 Fire ReX Jeweller expands the range of a wireless network and delivers a stable connection for EN54 Line devices across a large or complex facility. The range extender connects to the control and indicating equipment (CIE) wirelessly or via Ethernet, delivering reliable communication through steel and concrete. Up to 5 range extenders can operate within one Ajax system, and each supports any combination of devices for fire safety, automation, and intrusion protection. Mix devices within the CIE's limit to leverage the benefits of the integrated system, including visual verification of alarms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConnection possibilities\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eNumber of EN54 Fire ReX Jeweller connected to the CIE L up to 5\u003c\/li\u003e\n\t\u003cli\u003eNumber of devices connected to EN54 Fire ReX Jeweller : up to 199\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWireless communication\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e Jeweller communication technology : Proprietary wireless communication technology to transmit commands, alarms, and events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo-way communication.\u003c\/li\u003e\n\t\u003cli\u003eAdvanced sabotage protection.\u003c\/li\u003e\n\t\u003cli\u003eBlock encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eInstant notifications.\u003c\/li\u003e\n\t\u003cli\u003eRemote control and configuration in Ajax apps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFrequency bands : 866.0 – 866.5 MHz \/ 868.0 – 868.6 MHz \/ 868.7 – 869.2 MHz \/ 905.0 – 926.5 MHz \/ 915.85 – 926.5 MHz \/ 921.0 – 922.0 MHz\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMaximum effective radiated power (ERP) : up to 20 mW \/ Automatic power control to reduce power consumption and radio interference.\u003c\/li\u003e\n\t\u003cli\u003eRadio signal modulation : GFSK\u003c\/li\u003e\n\t\u003cli\u003eRadio communication range : up to 1,800 m \/ Between the CIE and connected devices (in an open space). Maximum range depends on the connected device.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data are protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e Wings communication technology : Proprietary wireless communication technology to transmit photo verifications and update firmware.\u003c\/p\u003e\n\n\u003cp\u003eKey features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo-way communication.\u003c\/li\u003e\n\t\u003cli\u003eAdvanced sabotage protection.\u003c\/li\u003e\n\t\u003cli\u003eBlock encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eData packet reload in case of transmission errors.\u003c\/li\u003e\n\t\u003cli\u003ePhoto delivery check.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFrequency bands : 866.0 – 866.5 MHz \/ 868.0 – 868.6 MHz \/ 868.7 – 869.2 MHz \/ 905.0 – 926.5 MHz \/ 915.85 – 926.5 MHz \/ 921.0 – 922.0 MHz\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eRadio communication range : up to 1,800 m \/ Between the CIE and a radio signal range extender, or between a range extender and connected devices (in an open space). Maximum range depends on the connected device.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data is protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCommunication channels\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEthernet : 1 8P8C socket \/ Up to 100 Mbps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eDelivery time\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAlarm delivery time to the CIE : 0.3 s\u003c\/li\u003e\n\t\u003cli\u003ePhoto delivery time to the CIE : 18 s\u003c\/li\u003e\n\t\u003cli\u003eVia EN54 Fire ReX Jeweller using the Wings channel. Delivery time depends on the settings. : 10 s\u003c\/li\u003e\n\t\u003cli\u003eVia EN54 Fire ReX Jeweller using the Ethernet channel. Delivery time depends on the settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAdditional features\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eLED indication : green\u003c\/li\u003e\n\t\u003cli\u003eFor power supply status. : yellow\u003c\/li\u003e\n\t\u003cli\u003eSpecial tool (key) : The special tool is used to remove the front panel from the range extender.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation recommendations : The device is designed for indoor use only. \/ The device operating voltage is 110–240 V~.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSabotage protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper buttons : 2 \/ Notifications about the fault on attempts to detach the device from the surface or remove the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003eProtection against spoofing : device authentication\u003c\/li\u003e\n\t\u003cli\u003eConnection loss detection : after 36 s \/ Detection time depends on Jeweller settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eExternal : 100–240 V, 50\/60 Hz \/ Up to 0.48 A of mains power consumption.\u003c\/li\u003e\n\t\u003cli\u003eInternal : 7.4 V⎓, 5 Ah\/10 Ah \/ On a rechargeable Li-ion battery (not included in the complete set): EN54 Internal Battery (24h) or EN54 Internal Battery (72h).\u003c\/li\u003e\n\t\u003cli\u003eQuiescent device’s current consumption at nominal voltage : 80 mA\u003c\/li\u003e\n\t\u003cli\u003eMaximum device’s current consumption at nominal voltage : 105 mA\u003c\/li\u003e\n\t\u003cli\u003eLow battery voltage : 6 V⎓\u003c\/li\u003e\n\t\u003cli\u003eLow battery recovery voltage : 6.2 V⎓\u003c\/li\u003e\n\t\u003cli\u003eEnd-of-life battery voltage : 6 V⎓ \/ Device is switched off.\u003c\/li\u003e\n\t\u003cli\u003eMinimum energy level for a backup battery in the charged state : 8 V⎓\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAutonomous operation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eOn internal battery : up to 50 hours : When Ethernet is enabled. On EN54 Internal Battery (24h) not included in the complete set. \/ up to 100 hours : When Ethernet is enabled. On EN54 Internal Battery (72h) not included in the complete set.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 210 × 210 × 51 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 890 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from −10 °C to +40 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 75% non-condensing\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP20\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eColors : Black\u003c\/li\u003e\n\t\u003cli\u003eComplete set \/ EN54 Fire ReX Jeweller \/ SmartBracket mounting panel \/ Installation kit \/ Ethernet cable \/ Special tool (key)  \/ Quick start guide\u003c\/li\u003e\n\t\u003cli\u003eRevision : 3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959605120,"sku":"29476","price":430.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/Ajax-EN54-Fire-ReX-Jeweller-weiss-vorne.jpg?v=1790679280"},{"product_id":"ms-electronics-26761","title":"Ajax EN54 Fire Detection Internal Battery For Hub\/Rex (72h) White","description":"\u003cul\u003e\n\t\u003cli\u003eEN54 Internal Battery is a rechargeable Li-ion battery for powering EN54 Fire Hub Jeweller or EN54 Fire ReX Jeweller.\u003c\/li\u003e\n\t\u003cli\u003eEN54 Internal Battery (72h). It provides up to 72 hours of autonomous operation for the device and has a capacity of 10 Ah.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBattery type\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery : 8 × 18650 \/ Rechargeable Li-ion battery.\u003c\/li\u003e\n\t\u003cli\u003eNominal voltage : 7.4 V⎓\u003c\/li\u003e\n\t\u003cli\u003eCapacity : 10 Ah\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMaximum load current : 3.2 A\u003c\/li\u003e\n\t\u003cli\u003eEnd-of-life battery voltage : 6 V⎓\u003c\/li\u003e\n\t\u003cli\u003ePower consumption\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with LTE only : 50 mA · h\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with Ethernet only : 120 mA · h\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with Wi-Fi only : 70 mA · h\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with Ethernet and Cellular (standby) : 102 mA · h\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with LTE, Wi-Fi, and Ethernet : 140 mA · h\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eRecommendations : Use the battery with compatible devices only. \/ The battery is designed for indoor use only.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 166 × 87 × 23 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 443 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from −10 °C to +40 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 75% non-condensing\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP20\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eInternal battery\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eColor : White\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eComplete set\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEN54 Internal Battery (72h)\u003c\/li\u003e\n\t\u003cli\u003eRevision : 2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959670656,"sku":"29480","price":152.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/Ajax-EN54-Internal-Battery-72h_1_Internal-Battery-72h.jpg?v=1790679281"},{"product_id":"ms-electronics-26760","title":"Ajax EN54 Fire Detection Internal Battery For Hub\/Rex (72h) Black","description":"\u003cul\u003e\n\t\u003cli\u003eEN54 Internal Battery is a rechargeable Li-ion battery for powering EN54 Fire Hub Jeweller or EN54 Fire ReX Jeweller.\u003c\/li\u003e\n\t\u003cli\u003eEN54 Internal Battery (72h). It provides up to 72 hours of autonomous operation for the device and has a capacity of 10 Ah.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBattery type\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery : 8 × 18650 \/ Rechargeable Li-ion battery.\u003c\/li\u003e\n\t\u003cli\u003eNominal voltage : 7.4 V⎓\u003c\/li\u003e\n\t\u003cli\u003eCapacity : 10 Ah\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMaximum load current : 3.2 A\u003c\/li\u003e\n\t\u003cli\u003eEnd-of-life battery voltage : 6 V⎓\u003c\/li\u003e\n\t\u003cli\u003ePower consumption\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with LTE only : 50 mA · h\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with Ethernet only : 120 mA · h\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with Wi-Fi only : 70 mA · h\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with Ethernet and Cellular (standby) : 102 mA · h\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with LTE, Wi-Fi, and Ethernet : 140 mA · h\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eRecommendations : Use the battery with compatible devices only. \/ The battery is designed for indoor use only.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 166 × 87 × 23 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 443 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from −10 °C to +40 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 75% non-condensing\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP20\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eInternal battery\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eColor : Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eComplete set\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEN54 Internal Battery (72h)\u003c\/li\u003e\n\t\u003cli\u003eRevision : 2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959703424,"sku":"29479","price":152.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/Ajax-EN54-Internal-Battery-72h_1_Internal-Battery-72h__1.jpg?v=1790679282"},{"product_id":"ms-electronics-26759","title":"Ajax EN54 Fire Detection Internal Battery For Hub\/Rex (24h) White","description":"\u003cul\u003e\n\t\u003cli\u003eEN54 Internal Battery is a rechargeable Li-ion battery for powering EN54 Fire Hub Jeweller or EN54 Fire ReX Jeweller.\u003c\/li\u003e\n\t\u003cli\u003eEN54 Internal Battery (24h). It provides up to 24 hours of autonomous operation for the device and has a capacity of 5 Ah.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBattery type\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery : 4 × 18650 \/ Rechargeable Li-ion battery.\u003c\/li\u003e\n\t\u003cli\u003eNominal voltage : 7.4 V⎓\u003c\/li\u003e\n\t\u003cli\u003eCapacity : 5 Ah\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMaximum load current : 3.2 A\u003c\/li\u003e\n\t\u003cli\u003eEnd-of-life battery voltage : 6 V⎓\u003c\/li\u003e\n\t\u003cli\u003ePower consumption\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with LTE only : 50 mA · h\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with Ethernet only : 120 mA · h\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with Wi-Fi only : 70 mA · h\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with Ethernet and Cellular (standby) : 102 mA · h\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with LTE, Wi-Fi, and Ethernet : 140 mA · h\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eRecommendations : Use the battery with compatible devices only. \/ The battery is designed for indoor use only.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 166 × 87 × 23 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 270 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from −10 °C to +40 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 75% non-condensing\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP20\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eInternal battery\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eColor : White\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eComplete set\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEN54 Internal Battery (24h)\u003c\/li\u003e\n\t\u003cli\u003eRevision : 2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959768960,"sku":"29478","price":106.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/rcoNXBGXz6xc3adLZCevH1tgBd55HWOXECrY6jeE.jpg?v=1790679282"},{"product_id":"ms-electronics-26758","title":"Ajax EN54 Fire Detection Internal Battery For Hub\/Rex (24h) Black","description":"\u003cul\u003e\n\t\u003cli\u003eEN54 Internal Battery is a rechargeable Li-ion battery for powering EN54 Fire Hub Jeweller or EN54 Fire ReX Jeweller.\u003c\/li\u003e\n\t\u003cli\u003eEN54 Internal Battery (24h). It provides up to 24 hours of autonomous operation for the device and has a capacity of 5 Ah.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBattery type\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery : 4 × 18650 \/ Rechargeable Li-ion battery.\u003c\/li\u003e\n\t\u003cli\u003eNominal voltage : 7.4 V⎓\u003c\/li\u003e\n\t\u003cli\u003eCapacity : 5 Ah\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMaximum load current : 3.2 A\u003c\/li\u003e\n\t\u003cli\u003eEnd-of-life battery voltage : 6 V⎓\u003c\/li\u003e\n\t\u003cli\u003ePower consumption\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with LTE only : 50 mA · h\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with Ethernet only : 120 mA · h\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with Wi-Fi only : 70 mA · h\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with Ethernet and Cellular (standby) : 102 mA · h\u003c\/li\u003e\n\t\u003cli\u003eAverage power consumption with LTE, Wi-Fi, and Ethernet : 140 mA · h\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eRecommendations : Use the battery with compatible devices only. \/ The battery is designed for indoor use only.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 166 × 87 × 23 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 270 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from −10 °C to +40 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 75% non-condensing\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP20\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eInternal battery\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eColor : Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eComplete set\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEN54 Internal Battery (24h)\u003c\/li\u003e\n\t\u003cli\u003eRevision : 2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959801728,"sku":"29477","price":106.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/Ajax-EN54-Internal-Battery-24h_1_Internal-Battery-24h.jpg?v=1790679283"},{"product_id":"ms-electronics-26757","title":"Ajax EN54 Fire Detection Rex Black","description":"\u003cul\u003e\n\t\u003cli\u003eEN54 Fire ReX Jeweller expands the range of a wireless network and delivers a stable connection for EN54 Line devices across a large or complex facility. The range extender connects to the control and indicating equipment (CIE) wirelessly or via Ethernet, delivering reliable communication through steel and concrete. Up to 5 range extenders can operate within one Ajax system, and each supports any combination of devices for fire safety, automation, and intrusion protection. Mix devices within the CIE's limit to leverage the benefits of the integrated system, including visual verification of alarms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConnection possibilities\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eNumber of EN54 Fire ReX Jeweller connected to the CIE L up to 5\u003c\/li\u003e\n\t\u003cli\u003eNumber of devices connected to EN54 Fire ReX Jeweller : up to 199\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWireless communication\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e Jeweller communication technology : Proprietary wireless communication technology to transmit commands, alarms, and events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo-way communication.\u003c\/li\u003e\n\t\u003cli\u003eAdvanced sabotage protection.\u003c\/li\u003e\n\t\u003cli\u003eBlock encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eInstant notifications.\u003c\/li\u003e\n\t\u003cli\u003eRemote control and configuration in Ajax apps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFrequency bands : 866.0 – 866.5 MHz \/ 868.0 – 868.6 MHz \/ 868.7 – 869.2 MHz \/ 905.0 – 926.5 MHz \/ 915.85 – 926.5 MHz \/ 921.0 – 922.0 MHz\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMaximum effective radiated power (ERP) : up to 20 mW \/ Automatic power control to reduce power consumption and radio interference.\u003c\/li\u003e\n\t\u003cli\u003eRadio signal modulation : GFSK\u003c\/li\u003e\n\t\u003cli\u003eRadio communication range : up to 1,800 m \/ Between the CIE and connected devices (in an open space). Maximum range depends on the connected device.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data are protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e Wings communication technology : Proprietary wireless communication technology to transmit photo verifications and update firmware.\u003c\/p\u003e\n\n\u003cp\u003eKey features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo-way communication.\u003c\/li\u003e\n\t\u003cli\u003eAdvanced sabotage protection.\u003c\/li\u003e\n\t\u003cli\u003eBlock encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eData packet reload in case of transmission errors.\u003c\/li\u003e\n\t\u003cli\u003ePhoto delivery check.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFrequency bands : 866.0 – 866.5 MHz \/ 868.0 – 868.6 MHz \/ 868.7 – 869.2 MHz \/ 905.0 – 926.5 MHz \/ 915.85 – 926.5 MHz \/ 921.0 – 922.0 MHz\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eRadio communication range : up to 1,800 m \/ Between the CIE and a radio signal range extender, or between a range extender and connected devices (in an open space). Maximum range depends on the connected device.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data is protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCommunication channels\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEthernet : 1 8P8C socket \/ Up to 100 Mbps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eDelivery time\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAlarm delivery time to the CIE : 0.3 s\u003c\/li\u003e\n\t\u003cli\u003ePhoto delivery time to the CIE : 18 s\u003c\/li\u003e\n\t\u003cli\u003eVia EN54 Fire ReX Jeweller using the Wings channel. Delivery time depends on the settings. : 10 s\u003c\/li\u003e\n\t\u003cli\u003eVia EN54 Fire ReX Jeweller using the Ethernet channel. Delivery time depends on the settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAdditional features\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eLED indication : green\u003c\/li\u003e\n\t\u003cli\u003eFor power supply status. : yellow\u003c\/li\u003e\n\t\u003cli\u003eSpecial tool (key) : The special tool is used to remove the front panel from the range extender.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation recommendations : The device is designed for indoor use only. \/ The device operating voltage is 110–240 V~.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSabotage protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper buttons : 2 \/ Notifications about the fault on attempts to detach the device from the surface or remove the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003eProtection against spoofing : device authentication\u003c\/li\u003e\n\t\u003cli\u003eConnection loss detection : after 36 s \/ Detection time depends on Jeweller settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eExternal : 100–240 V, 50\/60 Hz \/ Up to 0.48 A of mains power consumption.\u003c\/li\u003e\n\t\u003cli\u003eInternal : 7.4 V⎓, 5 Ah\/10 Ah \/ On a rechargeable Li-ion battery (not included in the complete set): EN54 Internal Battery (24h) or EN54 Internal Battery (72h).\u003c\/li\u003e\n\t\u003cli\u003eQuiescent device’s current consumption at nominal voltage : 80 mA\u003c\/li\u003e\n\t\u003cli\u003eMaximum device’s current consumption at nominal voltage : 105 mA\u003c\/li\u003e\n\t\u003cli\u003eLow battery voltage : 6 V⎓\u003c\/li\u003e\n\t\u003cli\u003eLow battery recovery voltage : 6.2 V⎓\u003c\/li\u003e\n\t\u003cli\u003eEnd-of-life battery voltage : 6 V⎓ \/ Device is switched off.\u003c\/li\u003e\n\t\u003cli\u003eMinimum energy level for a backup battery in the charged state : 8 V⎓\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAutonomous operation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eOn internal battery : up to 50 hours : When Ethernet is enabled. On EN54 Internal Battery (24h) not included in the complete set. \/ up to 100 hours : When Ethernet is enabled. On EN54 Internal Battery (72h) not included in the complete set.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 210 × 210 × 51 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 890 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from −10 °C to +40 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 75% non-condensing\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP20\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eColors : Black\u003c\/li\u003e\n\t\u003cli\u003eComplete set \/ EN54 Fire ReX Jeweller \/ SmartBracket mounting panel \/ Installation kit \/ Ethernet cable \/ Special tool (key)  \/ Quick start guide\u003c\/li\u003e\n\t\u003cli\u003eRevision : 3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959834496,"sku":"29475","price":430.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/EN54_Fire_ReX_Jeweller_front_left_Shop.jpg?v=1790679283"},{"product_id":"ms-electronics-26756","title":"Ajax EN54 Fire Detection Hub White","description":"\u003cul\u003e\n\t\u003cli\u003eIntroducing EN54 Fire Hub Jeweller, the Ajax's touchscreen CIE designed for all-around management of a fire safety system. It's easy to install, simple to use, and doesn't require much upkeep. Built-in communicators and a fully wireless device connection allow the system to be quickly deployed and connected to monitoring stations through Ajax apps. With its large touch screen and intuitive interface, the CIE provides detailed system status and alarm notifications, ensuring that staff are immediately aware of any situation.\u003c\/li\u003e\n\t\u003cli\u003eThe CIE also supports EN 50131 (Grade 2) intrusion protection, video surveillance, and automation devices, making it a unified solution for commercial and municipal sites. Each alarm can be supported by visual verification, helping guide the facility staff on responding to the emergency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCapacity\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDevices: up to 200 \/ Supports Ajax devices from the EN54 product line, wireless intrusion devices, and resettable buttons for manual fire alarm activation in any combination, except for the following:\u003c\/li\u003e\n\t\u003cli\u003eup to 10 intrusion sirens;\u003c\/li\u003e\n\t\u003cli\u003eup to 50 keypads with a built-in buzzer;\u003c\/li\u003e\n\t\u003cli\u003eup to up to 5 EN54 Fire ReX Jeweller range extenders.\u003c\/li\u003e\n\t\u003cli\u003eFire zones : up to 40 \/ Alerts about fire in separate zones. Every zone may include multiple rooms.\u003c\/li\u003e\n\t\u003cli\u003eAjax NVRs : up to 36\u003c\/li\u003e\n\t\u003cli\u003eAjax cameras : up to 224 via Ajax NVRs and up to 492 standalone\u003c\/li\u003e\n\t\u003cli\u003eThird-party IP cameras : up to 10 when using RTSP via SDK \/ up to 224 when using ONVIF via Ajax NVRs\u003c\/li\u003e\n\t\u003cli\u003eUsers : up to 200 \/ Any number of admin users within the CIE limit. \/ PRO accounts for installers. \/ PRO accounts for installation and monitoring companies. \/ Access management for users.\u003c\/li\u003e\n\t\u003cli\u003eAutomation scenarios : up to 64 \/ By alarm. \/ By schedule. \/ By arming\/disarming. \/ By temperature, humidity, CO2 concentration. \/ By pressing Button. \/ By touching LightSwitch.\u003c\/li\u003e\n\t\u003cli\u003eRooms : up to 80\u003c\/li\u003e\n\t\u003cli\u003eEvent log : up to 5,000 events \/ Fire alarm system events. Can be viewed on the CIE display. Events are saved on the non-volatile onboard flash memory. \/ up to 500 events \/ Fire alarm, intrusion, and other system events. Can be viewed in the events feed in Ajax apps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCommunication\u003cbr\u003e\n Jeweller communication technology\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eProprietary wireless communication technology to transmit commands, alarms, and events.\u003c\/li\u003e\n\t\u003cli\u003eKey features : Two-way communication. \/ Advanced sabotage protection. \/ Block encryption featuring a dynamic key. \/ Instant notifications. \/ Remote control and configuration in Ajax apps.\u003c\/li\u003e\n\t\u003cli\u003eFrequency bands : 866.0–866.5 MHz \/ 868.0–868.6 MHz \/ 868.7–869.2 MHz \/ 905.0–926.5 MHz \/ 915.85–926.5 MHz \/ 921.0–922.0 MHz\u003c\/li\u003e\n\t\u003cli\u003eMaximum effective radiated power (ERP) : up to 20 mW \/ Automatic power control to reduce power consumption and radio interference.\u003c\/li\u003e\n\t\u003cli\u003eRadio signal modulation : GFSK\u003c\/li\u003e\n\t\u003cli\u003eRadio communication range : up to 1,800 m \/ Between the CIE and connected devices (in an open space). Maximum range depends on the connected device.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data are protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e Wings communication technology\u003cbr\u003e\nProprietary wireless communication technology to transmit photo verifications and update firmware.\u003c\/p\u003e\n\n\u003cp\u003eKey features: Two-way communication. \/ Advanced sabotage protection. \/ Block encryption featuring a dynamic key. \/ Data packages reload in case of transmission errors. \/ Photo delivery check.\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eFrequency bands : 866.0–866.5 MHz \/ 868.0–868.6 MHz \/ 868.7–869.2 MHz \/ 905.0–926.5 MHz \/ 915.85–926.5 MHz \/ 921.0–922.0 MHz\u003c\/li\u003e\n\t\u003cli\u003eRadio communication range  : up to 1,800 m \/ Between the CIE and connected devices (in an open space). Maximum range depends on the connected device.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data is protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCommunication channels\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEthernet : 1 8P8C socket  \/ Up to 100 Mbps.\u003c\/li\u003e\n\t\u003cli\u003eCellular : 2 micro-SIM slots\u003c\/li\u003e\n\t\u003cli\u003eCellular frequencies : 2G \/ GSM900\/DCS1800 (B3\/B8) \/ 4G (LTE) \/ FDD B1\/B3\/B5\/B7\/B8\/B20\u003c\/li\u003e\n\t\u003cli\u003eWi-Fi  : 802.11 b\/g\/n module \/ up to 72 Mbps.\u003c\/li\u003e\n\t\u003cli\u003eAutomatic switching between communication channels : Instant switching between Ethernet, Wi-Fi, and SIM. \/ Instant switching between 4G (LTE), 3G, and 2G networks of one SIM. \/ Switching between SIMs takes up to 4 minutes.\u003c\/li\u003e\n\t\u003cli\u003eCommunication channels prioritization : Ethernet \/ Wi-Fi \/ Cellular connection \/ Communication channels work in parallel to increase the system’s reliability. Most of the data is transmitted via Ethernet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eNotifications\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSupported notification types : Push notifications \/ SMS \/ Calls\u003c\/li\u003e\n\t\u003cli\u003eEvent types : Alarms \/ Video alerts \/ Faults (for fire alarm devices) \/ Malfunctions (for other Ajax devices) \/ Security state change \/ System events \/ Non-security alerts \/ Automation devices \/ Smart lock events \/ Doorbell ringing \/ The notification types are configured individually for each user.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eMonitoring\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSupported protocols : SIA (DC-09) \/ SurGard (Contact ID)\u003c\/li\u003e\n\t\u003cli\u003eEvent types : System alarms and events \/ Panic button coordinates \/ Photo verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFire alarm system management\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eIndication of fire alarms and faults : display \/ LED indicators \/ sound \/ LEDs on the front panel of the CIE and the built-in buzzer notify users of fire alarms in zones, faults, and system states. In case of fire, the CIE also activates visual alarm devices and fire alarm sounders. The CIE display also shows system states and detailed alarm information.\u003c\/li\u003e\n\t\u003cli\u003eFire alarm control : start evacuation \/ reset \/ mute buzzer \/ silence \/ resound sounders \/ override delays (coming soon) \/ indication test \/ Users with appropriate rights can manage the fire alarm system via these options.\u003c\/li\u003e\n\t\u003cli\u003eFire alarm system settings : Users with appropriate rights can configure all fire alarm system settings via the CIE.\u003c\/li\u003e\n\t\u003cli\u003eEvent log : Stores a detailed log of fire alarms and system events. Capacity: up to 5,000 events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePhoto verification\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003ePhoto verification types : Photo by alarm \/ Photo by scenario \/ Photo on demand \/ Photo by schedule \/ Photo by arming\/disarming \/ More about photo by scenario \/ More about photo on demand \/ More about photo by schedule \/ More about photo by arming\/disarming\u003c\/li\u003e\n\t\u003cli\u003ePhoto delivery time : up to 9 s \/ By default.\u003c\/li\u003e\n\t\u003cli\u003ePhoto resolution : up to 960 × 720 pixels \/ Depends on the detector.\u003c\/li\u003e\n\t\u003cli\u003eNumber of photos in a series : from 1 to 5 pictures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAdditional features\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eUser authorization  : To manage the fire alarm system via the CIE touch screen, the user must log in by entering a code or presenting a personal access device.\u003c\/li\u003e\n\t\u003cli\u003eControl : codes \/ Tag key fobs (coming soon) \/ Pass cards (coming soon) \/\u003c\/li\u003e\n\t\u003cli\u003eContactless access (coming soon) \/ DESFire® EV1, EV2 \/ ISO14443-А (13.56 MHz)\u003c\/li\u003e\n\t\u003cli\u003eAccess codes : up to 200 codes  \/ One code per each user. Defines user access level to security and fire alarm system management.\u003c\/li\u003e\n\t\u003cli\u003eDuress codes : up to 200 personal codes  \/ One code per each user. \u003c\/li\u003e\n\t\u003cli\u003eBuilt-in buzzer : volume at least 60 dB at a distance of 1 m \/ Sound alerts of fire alarms. \/ volume at least 50 dB at a distance of 1 m \/ Sound alerts of faults.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eLED indication  : red : For fire alarms. \/ yellow : For device faults, tests, and disablements.  \/ green : For power supply status.\u003cbr\u003e\nSpecial tool (key) : The special tool is used to unlock the housing and replace the internal battery or dismantle the device from the SmartBracket mounting panel. The battery is not included in the CIE complete set.\u003cbr\u003e\nDisplay\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDiagonal : 10.1″\u003c\/li\u003e\n\t\u003cli\u003eMatrix type : IPS\u003c\/li\u003e\n\t\u003cli\u003eResolution : 1024 × 600 px\u003c\/li\u003e\n\t\u003cli\u003eSensor : capacitive\u003c\/li\u003e\n\t\u003cli\u003eBacklight settings : Manually adjustable in the CIE on-screen settings.\u003c\/li\u003e\n\t\u003cli\u003eInterface language : Configurable via the CIE touch screen or in the CIE settings in Ajax apps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOutputs\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eOutput 1 : Relay output for alerting the monitoring company in case of a system fault. Contact state is normally closed (NC) by default.\u003c\/li\u003e\n\t\u003cli\u003eOutput 2 : Relay output for alerting the monitoring company in case of a fire alarm. Contact state is normally open (NO) by default.\u003c\/li\u003e\n\t\u003cli\u003eOperating mode : bistable\u003c\/li\u003e\n\t\u003cli\u003eExternal power supply : 10–30 V⎓ \/ The relay does not supply power to connected devices.\u003c\/li\u003e\n\t\u003cli\u003eEnergy consumption  : up to 60 W \/ In standby mode.\u003c\/li\u003e\n\t\u003cli\u003eMaximum resistive load : up to 2 A at 30 V⎓\u003c\/li\u003e\n\t\u003cli\u003eMaximum inductive\/capacitive load : up to 2 A at 30 V⎓\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation recommendations : The device is designed for indoor use only. \/ Use GlandBox if power and signal cables are not routed inside the wall. \/ The device operating voltage is 110–240 V~.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSabotage protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper button : Notifications about the fault on attempts to detach the device from the surface or remove the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003eProtection against spoofing : device authentication\u003c\/li\u003e\n\t\u003cli\u003eConnection loss detection : after 36 s \/ Detection time depends on Jeweller settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eExternal  : 110–240 V, 50\/60 Hz \/ Up to 0.48 A of mains power consumption.\u003c\/li\u003e\n\t\u003cli\u003eInternal : 7.4 V⎓, 5 Ah\/10 Ah \/ On Rechargeable Li-ion battery not included in the complete set: EN54 Internal Battery (24h) or EN54 Internal Battery (72h).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAutonomous operation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eOn internal battery : up to 24 hours : On EN54 Internal Battery (24h) not included in the complete set. Battery life is based on display activation only when tapped, using W-Fi, Ethernet, and cellular (LTE) communication channels. \/ up to 72 hours : On EN54 Internal Battery (72h) not included in the complete set. Battery life is based on display activation only when tapped, using W-Fi, Ethernet, and cellular (LTE) communication channels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 263 × 223 × 54 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 1,526 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from -10 °C to +40 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 75% non-condensing\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP20\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\t\u003cli\u003eColor : White\u003c\/li\u003e\n\t\u003cli\u003eComplete set : EN54 Fire Hub Jeweller \/ SmartBracket mounting panel \/ Installation kit \/ Ethernet cable \/ Special tool (key) \/ Quick start guide\u003c\/li\u003e\n\t\u003cli\u003eRevision : 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959900032,"sku":"29474","price":1114.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/Ajax-EN54-Fire-Hub-Jeweller-weiss-front.jpg?v=1790679284"},{"product_id":"ms-electronics-26755","title":"Ajax EN54 Fire Detection Hub Black","description":"\u003cul\u003e\n\t\u003cli\u003eIntroducing EN54 Fire Hub Jeweller, the Ajax's touchscreen CIE designed for all-around management of a fire safety system. It's easy to install, simple to use, and doesn't require much upkeep. Built-in communicators and a fully wireless device connection allow the system to be quickly deployed and connected to monitoring stations through Ajax apps. With its large touch screen and intuitive interface, the CIE provides detailed system status and alarm notifications, ensuring that staff are immediately aware of any situation.\u003c\/li\u003e\n\t\u003cli\u003eThe CIE also supports EN 50131 (Grade 2) intrusion protection, video surveillance, and automation devices, making it a unified solution for commercial and municipal sites. Each alarm can be supported by visual verification, helping guide the facility staff on responding to the emergency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCapacity\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDevices: up to 200 \/ Supports Ajax devices from the EN54 product line, wireless intrusion devices, and resettable buttons for manual fire alarm activation in any combination, except for the following:\u003c\/li\u003e\n\t\u003cli\u003eup to 10 intrusion sirens;\u003c\/li\u003e\n\t\u003cli\u003eup to 50 keypads with a built-in buzzer;\u003c\/li\u003e\n\t\u003cli\u003eup to up to 5 EN54 Fire ReX Jeweller range extenders.\u003c\/li\u003e\n\t\u003cli\u003eFire zones : up to 40 \/ Alerts about fire in separate zones. Every zone may include multiple rooms.\u003c\/li\u003e\n\t\u003cli\u003eAjax NVRs : up to 36\u003c\/li\u003e\n\t\u003cli\u003eAjax cameras : up to 224 via Ajax NVRs and up to 492 standalone\u003c\/li\u003e\n\t\u003cli\u003eThird-party IP cameras : up to 10 when using RTSP via SDK \/ up to 224 when using ONVIF via Ajax NVRs\u003c\/li\u003e\n\t\u003cli\u003eUsers : up to 200 \/ Any number of admin users within the CIE limit. \/ PRO accounts for installers. \/ PRO accounts for installation and monitoring companies. \/ Access management for users.\u003c\/li\u003e\n\t\u003cli\u003eAutomation scenarios : up to 64 \/ By alarm. \/ By schedule. \/ By arming\/disarming. \/ By temperature, humidity, CO2 concentration. \/ By pressing Button. \/ By touching LightSwitch.\u003c\/li\u003e\n\t\u003cli\u003eRooms : up to 80\u003c\/li\u003e\n\t\u003cli\u003eEvent log : up to 5,000 events \/ Fire alarm system events. Can be viewed on the CIE display. Events are saved on the non-volatile onboard flash memory. \/ up to 500 events \/ Fire alarm, intrusion, and other system events. Can be viewed in the events feed in Ajax apps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCommunication\u003cbr\u003e\n Jeweller communication technology\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eProprietary wireless communication technology to transmit commands, alarms, and events.\u003c\/li\u003e\n\t\u003cli\u003eKey features : Two-way communication. \/ Advanced sabotage protection. \/ Block encryption featuring a dynamic key. \/ Instant notifications. \/ Remote control and configuration in Ajax apps.\u003c\/li\u003e\n\t\u003cli\u003eFrequency bands : 866.0–866.5 MHz \/ 868.0–868.6 MHz \/ 868.7–869.2 MHz \/ 905.0–926.5 MHz \/ 915.85–926.5 MHz \/ 921.0–922.0 MHz\u003c\/li\u003e\n\t\u003cli\u003eMaximum effective radiated power (ERP) : up to 20 mW \/ Automatic power control to reduce power consumption and radio interference.\u003c\/li\u003e\n\t\u003cli\u003eRadio signal modulation : GFSK\u003c\/li\u003e\n\t\u003cli\u003eRadio communication range : up to 1,800 m \/ Between the CIE and connected devices (in an open space). Maximum range depends on the connected device.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data are protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e Wings communication technology\u003cbr\u003e\nProprietary wireless communication technology to transmit photo verifications and update firmware.\u003c\/p\u003e\n\n\u003cp\u003eKey features: Two-way communication. \/ Advanced sabotage protection. \/ Block encryption featuring a dynamic key. \/ Data packages reload in case of transmission errors. \/ Photo delivery check.\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eFrequency bands : 866.0–866.5 MHz \/ 868.0–868.6 MHz \/ 868.7–869.2 MHz \/ 905.0–926.5 MHz \/ 915.85–926.5 MHz \/ 921.0–922.0 MHz\u003c\/li\u003e\n\t\u003cli\u003eRadio communication range  : up to 1,800 m \/ Between the CIE and connected devices (in an open space). Maximum range depends on the connected device.\u003c\/li\u003e\n\t\u003cli\u003eEncrypted communication : All stored and transmitted data is protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eFrequency hopping : To prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCommunication channels\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEthernet : 1 8P8C socket  \/ Up to 100 Mbps.\u003c\/li\u003e\n\t\u003cli\u003eCellular : 2 micro-SIM slots\u003c\/li\u003e\n\t\u003cli\u003eCellular frequencies : 2G \/ GSM900\/DCS1800 (B3\/B8) \/ 4G (LTE) \/ FDD B1\/B3\/B5\/B7\/B8\/B20\u003c\/li\u003e\n\t\u003cli\u003eWi-Fi  : 802.11 b\/g\/n module \/ up to 72 Mbps.\u003c\/li\u003e\n\t\u003cli\u003eAutomatic switching between communication channels : Instant switching between Ethernet, Wi-Fi, and SIM. \/ Instant switching between 4G (LTE), 3G, and 2G networks of one SIM. \/ Switching between SIMs takes up to 4 minutes.\u003c\/li\u003e\n\t\u003cli\u003eCommunication channels prioritization : Ethernet \/ Wi-Fi \/ Cellular connection \/ Communication channels work in parallel to increase the system’s reliability. Most of the data is transmitted via Ethernet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eNotifications\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSupported notification types : Push notifications \/ SMS \/ Calls\u003c\/li\u003e\n\t\u003cli\u003eEvent types : Alarms \/ Video alerts \/ Faults (for fire alarm devices) \/ Malfunctions (for other Ajax devices) \/ Security state change \/ System events \/ Non-security alerts \/ Automation devices \/ Smart lock events \/ Doorbell ringing \/ The notification types are configured individually for each user.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eMonitoring\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSupported protocols : SIA (DC-09) \/ SurGard (Contact ID)\u003c\/li\u003e\n\t\u003cli\u003eEvent types : System alarms and events \/ Panic button coordinates \/ Photo verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFire alarm system management\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eIndication of fire alarms and faults : display \/ LED indicators \/ sound \/ LEDs on the front panel of the CIE and the built-in buzzer notify users of fire alarms in zones, faults, and system states. In case of fire, the CIE also activates visual alarm devices and fire alarm sounders. The CIE display also shows system states and detailed alarm information.\u003c\/li\u003e\n\t\u003cli\u003eFire alarm control : start evacuation \/ reset \/ mute buzzer \/ silence \/ resound sounders \/ override delays (coming soon) \/ indication test \/ Users with appropriate rights can manage the fire alarm system via these options.\u003c\/li\u003e\n\t\u003cli\u003eFire alarm system settings : Users with appropriate rights can configure all fire alarm system settings via the CIE.\u003c\/li\u003e\n\t\u003cli\u003eEvent log : Stores a detailed log of fire alarms and system events. Capacity: up to 5,000 events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePhoto verification\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003ePhoto verification types : Photo by alarm \/ Photo by scenario \/ Photo on demand \/ Photo by schedule \/ Photo by arming\/disarming \/ More about photo by scenario \/ More about photo on demand \/ More about photo by schedule \/ More about photo by arming\/disarming\u003c\/li\u003e\n\t\u003cli\u003ePhoto delivery time : up to 9 s \/ By default.\u003c\/li\u003e\n\t\u003cli\u003ePhoto resolution : up to 960 × 720 pixels \/ Depends on the detector.\u003c\/li\u003e\n\t\u003cli\u003eNumber of photos in a series : from 1 to 5 pictures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAdditional features\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eUser authorization  : To manage the fire alarm system via the CIE touch screen, the user must log in by entering a code or presenting a personal access device.\u003c\/li\u003e\n\t\u003cli\u003eControl : codes \/ Tag key fobs (coming soon) \/ Pass cards (coming soon) \/\u003c\/li\u003e\n\t\u003cli\u003eContactless access (coming soon) \/ DESFire® EV1, EV2 \/ ISO14443-А (13.56 MHz)\u003c\/li\u003e\n\t\u003cli\u003eAccess codes : up to 200 codes  \/ One code per each user. Defines user access level to security and fire alarm system management.\u003c\/li\u003e\n\t\u003cli\u003eDuress codes : up to 200 personal codes  \/ One code per each user. \u003c\/li\u003e\n\t\u003cli\u003eBuilt-in buzzer : volume at least 60 dB at a distance of 1 m \/ Sound alerts of fire alarms. \/ volume at least 50 dB at a distance of 1 m \/ Sound alerts of faults.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eLED indication  : red : For fire alarms. \/ yellow : For device faults, tests, and disablements.  \/ green : For power supply status.\u003cbr\u003e\nSpecial tool (key) : The special tool is used to unlock the housing and replace the internal battery or dismantle the device from the SmartBracket mounting panel. The battery is not included in the CIE complete set.\u003cbr\u003e\nDisplay\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDiagonal : 10.1″\u003c\/li\u003e\n\t\u003cli\u003eMatrix type : IPS\u003c\/li\u003e\n\t\u003cli\u003eResolution : 1024 × 600 px\u003c\/li\u003e\n\t\u003cli\u003eSensor : capacitive\u003c\/li\u003e\n\t\u003cli\u003eBacklight settings : Manually adjustable in the CIE on-screen settings.\u003c\/li\u003e\n\t\u003cli\u003eInterface language : Configurable via the CIE touch screen or in the CIE settings in Ajax apps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOutputs\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eOutput 1 : Relay output for alerting the monitoring company in case of a system fault. Contact state is normally closed (NC) by default.\u003c\/li\u003e\n\t\u003cli\u003eOutput 2 : Relay output for alerting the monitoring company in case of a fire alarm. Contact state is normally open (NO) by default.\u003c\/li\u003e\n\t\u003cli\u003eOperating mode : bistable\u003c\/li\u003e\n\t\u003cli\u003eExternal power supply : 10–30 V⎓ \/ The relay does not supply power to connected devices.\u003c\/li\u003e\n\t\u003cli\u003eEnergy consumption  : up to 60 W \/ In standby mode.\u003c\/li\u003e\n\t\u003cli\u003eMaximum resistive load : up to 2 A at 30 V⎓\u003c\/li\u003e\n\t\u003cli\u003eMaximum inductive\/capacitive load : up to 2 A at 30 V⎓\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation recommendations : The device is designed for indoor use only. \/ Use GlandBox if power and signal cables are not routed inside the wall. \/ The device operating voltage is 110–240 V~.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSabotage protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper button : Notifications about the fault on attempts to detach the device from the surface or remove the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003eProtection against spoofing : device authentication\u003c\/li\u003e\n\t\u003cli\u003eConnection loss detection : after 36 s \/ Detection time depends on Jeweller settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eExternal  : 110–240 V, 50\/60 Hz \/ Up to 0.48 A of mains power consumption.\u003c\/li\u003e\n\t\u003cli\u003eInternal : 7.4 V⎓, 5 Ah\/10 Ah \/ On Rechargeable Li-ion battery not included in the complete set: EN54 Internal Battery (24h) or EN54 Internal Battery (72h).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAutonomous operation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eOn internal battery : up to 24 hours : On EN54 Internal Battery (24h) not included in the complete set. Battery life is based on display activation only when tapped, using W-Fi, Ethernet, and cellular (LTE) communication channels. \/ up to 72 hours : On EN54 Internal Battery (72h) not included in the complete set. Battery life is based on display activation only when tapped, using W-Fi, Ethernet, and cellular (LTE) communication channels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 263 × 223 × 54 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 1,526 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from -10 °C to +40 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 75% non-condensing\u003c\/li\u003e\n\t\u003cli\u003eProtection class : IP20\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\t\u003cli\u003eColor : Black\u003c\/li\u003e\n\t\u003cli\u003eComplete set : EN54 Fire Hub Jeweller \/ SmartBracket mounting panel \/ Installation kit \/ Ethernet cable \/ Special tool (key) \/ Quick start guide\u003c\/li\u003e\n\t\u003cli\u003eRevision : 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59996959932800,"sku":"29473","price":1114.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/EN54_Fire_Hub_Jeweller_front_left_Shop.jpg?v=1790679285"},{"product_id":"ms-electronics-25973","title":"Ajax EN54 Fire Detection GlandBox (Hub Backbox) White","description":"\u003cul\u003e\n\t\u003cli\u003eGlandBox is a wiring accessory for neat lateral cable entry into the EN54 Fire Hub Jeweller enclosure. It ensures clean and professional installation when in-wall cable routing isn’t possible — for example, in historical buildings or temporary commercial setups. GlandBox provides secure cable fixation using red glands1 and integrates seamlessly with the CIE design, maintaining the sleek and tidy look.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey features\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003ePlaces to install cable glands : 16 For routing cables that are not hidden inside the wall. There are four places on each side.\u003c\/li\u003e\n\t\u003cli\u003eCable gland diameter : up to 20 mmCable glands are not included in the complete set.\u003c\/li\u003e\n\t\u003cli\u003eRecesses for drilling : The drill bit is fixed in the recess and does not move during drilling. We recommend using a hole saw for plastic with a diameter of up to 20 mm.\u003c\/li\u003e\n\t\u003cli\u003eSabotage protection : tamper button .The perforated part of GlandBox is used for the EN54 Fire Hub Jeweller tamper button to trigger when the CIE is installed in GlandBox. An Ajax system sends fault notifications if an attempt is made to detach GlandBox from the surface or remove the CIE from the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003eCable fasteners : To hold the cables together with ties.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAids for easy installation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBubble level\u003c\/li\u003e\n\t\u003cli\u003eUP key\u003c\/li\u003e\n\t\u003cli\u003eCIE center marking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe bubble level allows for checking the casing inclination angle. The intersection of two lines marks the center of the CIE, and the UP key marks its top.\u003c\/p\u003e\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 263 × 223 × 40 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 335 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from –10 °C to +40 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 75% non-condensing\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59997013737856,"sku":"28691","price":76.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/dfvs.jpg?v=1790679855"},{"product_id":"ms-electronics-25972","title":"Ajax EN54 Fire Detection GlandBox (Hub Backbox) Black","description":"\u003cul\u003e\n\t\u003cli\u003eGlandBox is a wiring accessory for neat lateral cable entry into the EN54 Fire Hub Jeweller enclosure. It ensures clean and professional installation when in-wall cable routing isn’t possible — for example, in historical buildings or temporary commercial setups. GlandBox provides secure cable fixation using red glands1 and integrates seamlessly with the CIE design, maintaining the sleek and tidy look.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey features\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003ePlaces to install cable glands : 16 For routing cables that are not hidden inside the wall. There are four places on each side.\u003c\/li\u003e\n\t\u003cli\u003eCable gland diameter : up to 20 mmCable glands are not included in the complete set.\u003c\/li\u003e\n\t\u003cli\u003eRecesses for drilling : The drill bit is fixed in the recess and does not move during drilling. We recommend using a hole saw for plastic with a diameter of up to 20 mm.\u003c\/li\u003e\n\t\u003cli\u003eSabotage protection : tamper button .The perforated part of GlandBox is used for the EN54 Fire Hub Jeweller tamper button to trigger when the CIE is installed in GlandBox. An Ajax system sends fault notifications if an attempt is made to detach GlandBox from the surface or remove the CIE from the mounting panel.\u003c\/li\u003e\n\t\u003cli\u003eCable fasteners : To hold the cables together with ties.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAids for easy installation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBubble level\u003c\/li\u003e\n\t\u003cli\u003eUP key\u003c\/li\u003e\n\t\u003cli\u003eCIE center marking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe bubble level allows for checking the casing inclination angle. The intersection of two lines marks the center of the CIE, and the UP key marks its top.\u003c\/p\u003e\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 263 × 223 × 40 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 335 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from –10 °C to +40 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 75% non-condensing\u003c\/li\u003e\n\t\u003cli\u003eFlammability rating : UL 94 V-0\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59997013836160,"sku":"28690","price":76.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/30406009.jpg?v=1790679856"},{"product_id":"ms-electronics-25971","title":"Ajax EN54 Fire Detection I\/O Module (2X2) White","description":"\u003cp\u003eEN54 I\/O Module (2X2) Jeweller blurs the limits for use cases and compatibility in EN 54-certified Ajax setups. It automates responses to emergencies by integrating gates, door locks, lighting, or alert systems through the module outputs. Its inputs allow complementing the setup with beam smoke detectors, elevator control panels, HVAC systems, or other wired third-party devices to address any fire or life safety scenario. Designed to deliver an Ajax-level experience, the module offers out-of-the-box communication with the CIE, intuitive configuration via Ajax apps, and zero-hassle maintenance.\u003c\/p\u003e\n\u003cp\u003eCommunication (Jeweller)\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eTechnology: Proprietary wireless communication to transmit commands, alarms, and events\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eKey features: Two‑way communication; advanced sabotage protection; block encryption with dynamic key; instant notifications; remote control and configuration in Ajax apps\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eFrequency bands (depends on sales region):\u003c\/p\u003e\n\n\t\u003cul\u003e\n\t\t\u003cli\u003e\n\t\t\u003cp\u003e866.0–866.5 MHz\u003c\/p\u003e\n\t\t\u003c\/li\u003e\n\t\t\u003cli\u003e\n\t\t\u003cp\u003e868.0–868.6 MHz\u003c\/p\u003e\n\t\t\u003c\/li\u003e\n\t\t\u003cli\u003e\n\t\t\u003cp\u003e868.7–869.2 MHz\u003c\/p\u003e\n\t\t\u003c\/li\u003e\n\t\t\u003cli\u003e\n\t\t\u003cp\u003e905.0–926.5 MHz\u003c\/p\u003e\n\t\t\u003c\/li\u003e\n\t\t\u003cli\u003e\n\t\t\u003cp\u003e915.85–926.5 MHz\u003c\/p\u003e\n\t\t\u003c\/li\u003e\n\t\t\u003cli\u003e\n\t\t\u003cp\u003e921.0–922.0 MHz\u003c\/p\u003e\n\t\t\u003c\/li\u003e\n\t\u003c\/ul\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eMaximum ERP: up to 20 mW\u003cbr\u003e\n\tAutomatic power control reduces power consumption and radio interference\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eRadio modulation: GFSK\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eRadio communication range: up to 1,700 m (open space) between the device and a CIE or range extender\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eEncrypted communication: Block encryption with dynamic key for stored and transmitted data\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eFrequency hopping: To prevent radio interference and jamming\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eInputs\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eNumber of input lines for third‑party devices: 2\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eInput terminals:\u003c\/p\u003e\n\n\t\u003cul\u003e\n\t\t\u003cli\u003e\n\t\t\u003cp\u003eInput 1, Input 2 — inputs for connecting third‑party wired devices\u003c\/p\u003e\n\t\t\u003c\/li\u003e\n\t\t\u003cli\u003e\n\t\t\u003cp\u003eShield — common input for connecting shields of cables that connect third‑party wired devices\u003c\/p\u003e\n\t\t\u003c\/li\u003e\n\t\u003c\/ul\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eType of connection: NO, NC, EOL, 2EOL, 3EOL\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eEOL resistance: 0.47 kΩ, 1.2 kΩ, 2.7 kΩ, 6.2 kΩ\u003cbr\u003e\n\tFour resistors for each input are included in the complete set\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eLength of wired connection to third‑party devices: up to 100 m (with 2×1.5 mm² \/ 16 AWG fire‑resistant cable)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eCable cross‑section: 0.4–2.5 mm² (21–13 AWG)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOutputs\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eNumber of output lines for third‑party devices: 2\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eOutput terminals: Output 1, Output 2 — relay outputs for connecting third‑party wired devices\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eAC operating range: 10—250 V~; 5 mA to 10 A (resistive load)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eDC operating range: 10—30 V⎓; 5 mA to 5 A (resistive load)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eCable cross‑section: 0.4–2.5 mm² (21–13 AWG)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey Features \u0026amp; Behaviour\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eEvent types: Configurable in Ajax apps (PRO or user with admin rights). Selected type determines notification texts and CMS event codes for connected wired devices\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eFail‑safe mode: If the module is offline, discharged, or has hardware problems, it automatically activates the connected devices\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eInstallation: Indoor use only\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eSabotage \u0026amp; Integrity Protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eTamper alarm: Notifies attempts to detach the module from the surface or open the front lid\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eProtection against spoofing: Device authentication\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eConnection loss detection: After 36 s (depends on Jeweller settings)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eInput monitoring: Detection of wired connection loss, short circuits, and malfunctions when EOL\/2EOL\/3EOL connection is used (depends on connection type)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eBattery: 2 × CR123A (pre‑installed)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eCalculated battery life: up to 5 years\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCasing\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eDimensions: 116 × 180 × 62 mm\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eWeight: 547 g\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eOperating temperature range: 0 °C to +50 °C\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eOperating humidity: up to 80%\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eProtection class: IP21C\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eFlammability rating: UL 94 V‑0\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eColors: Black, White\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eComplete Set\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eEN54 I\/O Module (2×2) Jeweller\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003e2 × CR123A battery (pre‑installed)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eInstallation kit\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003e2 × set of 4 EOL resistors\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eQuick start guide\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59997013868928,"sku":"28689","price":166.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/f16b47e7-2395-48c7-ae10-b3eaf3f88d4d.jpg?v=1790679857"},{"product_id":"ms-electronics-25970","title":"Ajax EN54 Fire Detection I\/O Module (2X2) Black","description":"\u003cp\u003eEN54 I\/O Module (2X2) Jeweller blurs the limits for use cases and compatibility in EN 54-certified Ajax setups. It automates responses to emergencies by integrating gates, door locks, lighting, or alert systems through the module outputs. Its inputs allow complementing the setup with beam smoke detectors, elevator control panels, HVAC systems, or other wired third-party devices to address any fire or life safety scenario. Designed to deliver an Ajax-level experience, the module offers out-of-the-box communication with the CIE, intuitive configuration via Ajax apps, and zero-hassle maintenance.\u003c\/p\u003e\n\u003cp\u003eCommunication (Jeweller)\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eTechnology: Proprietary wireless communication to transmit commands, alarms, and events\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eKey features: Two‑way communication; advanced sabotage protection; block encryption with dynamic key; instant notifications; remote control and configuration in Ajax apps\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eFrequency bands (depends on sales region):\u003c\/p\u003e\n\n\t\u003cul\u003e\n\t\t\u003cli\u003e\n\t\t\u003cp\u003e866.0–866.5 MHz\u003c\/p\u003e\n\t\t\u003c\/li\u003e\n\t\t\u003cli\u003e\n\t\t\u003cp\u003e868.0–868.6 MHz\u003c\/p\u003e\n\t\t\u003c\/li\u003e\n\t\t\u003cli\u003e\n\t\t\u003cp\u003e868.7–869.2 MHz\u003c\/p\u003e\n\t\t\u003c\/li\u003e\n\t\t\u003cli\u003e\n\t\t\u003cp\u003e905.0–926.5 MHz\u003c\/p\u003e\n\t\t\u003c\/li\u003e\n\t\t\u003cli\u003e\n\t\t\u003cp\u003e915.85–926.5 MHz\u003c\/p\u003e\n\t\t\u003c\/li\u003e\n\t\t\u003cli\u003e\n\t\t\u003cp\u003e921.0–922.0 MHz\u003c\/p\u003e\n\t\t\u003c\/li\u003e\n\t\u003c\/ul\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eMaximum ERP: up to 20 mW\u003cbr\u003e\n\tAutomatic power control reduces power consumption and radio interference\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eRadio modulation: GFSK\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eRadio communication range: up to 1,700 m (open space) between the device and a CIE or range extender\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eEncrypted communication: Block encryption with dynamic key for stored and transmitted data\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eFrequency hopping: To prevent radio interference and jamming\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eInputs\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eNumber of input lines for third‑party devices: 2\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eInput terminals:\u003c\/p\u003e\n\n\t\u003cul\u003e\n\t\t\u003cli\u003e\n\t\t\u003cp\u003eInput 1, Input 2 — inputs for connecting third‑party wired devices\u003c\/p\u003e\n\t\t\u003c\/li\u003e\n\t\t\u003cli\u003e\n\t\t\u003cp\u003eShield — common input for connecting shields of cables that connect third‑party wired devices\u003c\/p\u003e\n\t\t\u003c\/li\u003e\n\t\u003c\/ul\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eType of connection: NO, NC, EOL, 2EOL, 3EOL\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eEOL resistance: 0.47 kΩ, 1.2 kΩ, 2.7 kΩ, 6.2 kΩ\u003cbr\u003e\n\tFour resistors for each input are included in the complete set\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eLength of wired connection to third‑party devices: up to 100 m (with 2×1.5 mm² \/ 16 AWG fire‑resistant cable)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eCable cross‑section: 0.4–2.5 mm² (21–13 AWG)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOutputs\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eNumber of output lines for third‑party devices: 2\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eOutput terminals: Output 1, Output 2 — relay outputs for connecting third‑party wired devices\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eAC operating range: 10—250 V~; 5 mA to 10 A (resistive load)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eDC operating range: 10—30 V⎓; 5 mA to 5 A (resistive load)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eCable cross‑section: 0.4–2.5 mm² (21–13 AWG)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eKey Features \u0026amp; Behaviour\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eEvent types: Configurable in Ajax apps (PRO or user with admin rights). Selected type determines notification texts and CMS event codes for connected wired devices\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eFail‑safe mode: If the module is offline, discharged, or has hardware problems, it automatically activates the connected devices\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eInstallation: Indoor use only\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eSabotage \u0026amp; Integrity Protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eTamper alarm: Notifies attempts to detach the module from the surface or open the front lid\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eProtection against spoofing: Device authentication\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eConnection loss detection: After 36 s (depends on Jeweller settings)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eInput monitoring: Detection of wired connection loss, short circuits, and malfunctions when EOL\/2EOL\/3EOL connection is used (depends on connection type)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eBattery: 2 × CR123A (pre‑installed)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eCalculated battery life: up to 5 years\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCasing\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eDimensions: 116 × 180 × 62 mm\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eWeight: 547 g\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eOperating temperature range: 0 °C to +50 °C\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eOperating humidity: up to 80%\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eProtection class: IP21C\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eFlammability rating: UL 94 V‑0\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eColors: Black, White\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eComplete Set\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eEN54 I\/O Module (2×2) Jeweller\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003e2 × CR123A battery (pre‑installed)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eInstallation kit\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003e2 × set of 4 EOL resistors\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eQuick start guide\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59997013934464,"sku":"28688","price":166.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/30406028.jpg?v=1790679858"},{"product_id":"ms-electronics-25636","title":"Ajax EN54 Fire Detection Manual Call Point Red","description":"\u003cp\u003e\u003cstrong\u003eWireless resettable button for manual fire alarm activation featuring programmable scenarios.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eManualCallPoint (Red) Jeweller is a fast and straightforward way for anyone to activate the fire alarm. Pressing the button triggers the built-in sirens of all fire detectors in the system and informs the users. Meanwhile, the central monitoring station (CMS) receives the alarm and calls emergency services. All the data is instantly available in Ajax apps: which device was triggered, when, and where. In a life-endangering situation, Ajax innovative features follow an alarm in seconds: automation scenarios de-energize the facility, turn the emergency lights, and unlock the exits.\u003c\/p\u003e\n\u003cp\u003eSabotage Protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper alarm : Notifies on attempts to detach the button from the surface or remove it from the mounting panel\u003c\/li\u003e\n\t\u003cli\u003eProtection against spoofing : Via device authentication\u003c\/li\u003e\n\t\u003cli\u003eCommunication loss detection : After 36 seconds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eDetection time depends on the Jeweller or Jeweller\/Fibra settings\u003c\/p\u003e\n\n\u003cp\u003ePower Supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBatteries : 2 × CR123A (pre-installed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWith typical use (one press lasting 1 minute per week), the batteries can last up to 7 years\u003c\/p\u003e\n\n\u003cp\u003eEnclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 102 × 104 × 39 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 214 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : 0 °C to +50 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : Up to 80%\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59997057843584,"sku":"28356","price":126.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/manual-call-point-red.png?v=1790680081"},{"product_id":"ms-electronics-24723","title":"Ajax EN54 Fire Detection Manual Call Point Green","description":"\u003cp\u003eCompatible Stations : Hub (4G) Jeweller \/ Hub 2 (2G) Jeweller \/ Hub 2 (4G) Jeweller \/ Hub 2 Plus Jeweller \/ Hub BP Jeweller \/ Hub Hybrid (2G) \/ Hub Hybrid (4G) \/ Hub Plus Jeweller \/ ReX 2 Jeweller \/ ReX Jeweller\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe device is designed for indoor installation only.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCommunication\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo-way communication.\u003c\/li\u003e\n\t\u003cli\u003eAdvanced sabotage protection.\u003c\/li\u003e\n\t\u003cli\u003eBlock encryption featuring a dynamic key.\u003c\/li\u003e\n\t\u003cli\u003eInstant notifications.\u003c\/li\u003e\n\t\u003cli\u003eRemote control and configuration in Ajax apps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cbr\u003e\nFrequency bands\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e866.0–866.5 MHz\u003c\/li\u003e\n\t\u003cli\u003e868.0–868.6 MHz\u003c\/li\u003e\n\t\u003cli\u003e868.7–869.2 MHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eMaximum effective radiated power (ERP)\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eup to 25 mW\u003c\/li\u003e\n\t\u003cli\u003eAutomatic power control to reduce power consumption and radio interference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eRadio signal modulation\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eGFSK\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eRadio signal range\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eup to 1,700 m\u003c\/li\u003e\n\t\u003cli\u003eBetween the button and a hub (or range extender) in an open space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEncrypted communication\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAll stored and transmitted data is protected by block encryption featuring a dynamic key.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFrequency hopping\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTo prevent radio interference and jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eResettable frangible element\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eactivates the button\u003c\/li\u003e\n\t\u003cli\u003eWhen the central part (frangible element) is pressed, the button depresses inward, initiating a scenario or triggering an alarm. Two yellow stripes appear at the top and bottom, indicating the device's state.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOperating modes\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003escenario trigger\u003c\/li\u003e\n\t\u003cli\u003efire alarm\u003c\/li\u003e\n\t\u003cli\u003eauxiliary alarm\u003c\/li\u003e\n\t\u003cli\u003epanic button\u003c\/li\u003e\n\t\u003cli\u003egas leak alarm\u003c\/li\u003e\n\t\u003cli\u003emalfunction alert\u003c\/li\u003e\n\t\u003cli\u003ewater leak alarm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eLED status indication\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eThe LED indicator on the device enclosure lights up when the button is activated, or malfunctions are detected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eInterconnected fire detectors alarms\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBy pressing the button\u003c\/li\u003e\n\t\u003cli\u003eBy pressing the frangible element, fire detectors in the system trigger the built-in sirens.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCritical alerts\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eThe system can activate intrusion sirens and send audible alarm notifications to users, even if the sound is muted, the Do Not Disturb mode is on, or headphones are connected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eProtection against accidental presses\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eLift the transparent lid to access the frangible element. The lid protects against false button presses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlarm transmission to CMS\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003edisabled by default\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eButton reset\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eafter pressing\u003c\/li\u003e\n\t\u003cli\u003eTo reset the button, insert the special tool into the corresponding hole.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cbr\u003e\nHole in the enclosure\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eto hang on a ring from a keychain\u003c\/li\u003e\n\t\u003cli\u003eThe person responsible for fire safety can carry the special tool on their keychain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eConvenient dismantling\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eThe special tool opens the lock to dismantle the device from SmartBracket mounting panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eSabotage protection\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTamper alarm\u003c\/li\u003e\n\t\u003cli\u003eNotifies on attempts to detach the button from the surface or remove it from the mounting panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower supply\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e Batteries : 2 × CR123A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePre-installed. With typical use (one press lasting 1 minute per week), the batteries can last up to 7 years.\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions : 102 × 104 × 39 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight : 214 g\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature range : from 0 °C to +50 °C\u003c\/li\u003e\n\t\u003cli\u003eOperating humidity : up to 80%\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"MS Electronics","offers":[{"title":"Default Title","offer_id":59997121479040,"sku":"27449","price":126.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/files\/Capture_1737789706.jpg?v=1790680681"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0613\/0571\/6788\/collections\/30406023_1769855156_d855f0f0-313b-43a4-bff4-631e9ca5d7bd.jpg?v=1790674382","url":"https:\/\/atlantic-mall.com\/fr\/collections\/metropolis-security-fire-alarm-wireless-fire-system.oembed","provider":"Atlantic Shopping Mall","version":"1.0","type":"link"}